| Post 1 made on Wednesday January 18, 2006 at 22:53 |
hjburt Lurking Member |
Joined:
Posts: | January 2006
2 |
|
|
Hi,
I am a new AV 3000 owner and my issue is with my five Sony CD changers. I have two 200 units, one 300 unit, and two 400 units.
Some of the changers offer setting 1-2-3. What is the best to individualize these machines for operation on the AV 3000?
Thank you.
J. Burt
|
|
| Post 2 made on Thursday January 19, 2006 at 09:44 |
Ron Aronson Super Member |
Joined:
Posts: | June 2002
3,967 |
|
|
If you can set the original remote and the CD changer for each individual code, then just learn all the commands you need for each of the individual codes on the 3000. You can either learn them on the same screen, if there are not too many commands to be learned, or on different screens.
|
|
| OP | Post 3 made on Thursday January 19, 2006 at 22:23 |
hjburt Lurking Member |
Joined:
Posts: | January 2006
2 |
|
|
Thanks.
Upon further playing with the 'searching' the preset codes I discovered the preset code for 1, 2, and 3. Now I have to decide if Iwant to keep the S Link, which I think will be yes since both units have to be powered on for the daisey chain to work.
J. Burt
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
