Your Universal Remote Control Center
RemoteCentral.com
Sony Remote Controls Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
RMT-D240A Problems - all buttons show "DVD 3" on player
This thread has 4 replies. Displaying all posts.
Post 1 made on Tuesday September 23, 2008 at 23:49
Captain59
Lurking Member
Joined:
Posts:
September 2008
1
I have a Song RDR-VX555 VCR/DVD recorder. I must have done something wrong, because now whenever I press a button on the remote, including Power, the screen on the player shows "DVD 3" and that's it. I don't know what I did or how to correct this.

I was able to program the buttons on the bottom for the TV OK--those work fine--but the rest of the remote has the above problem.

Help!

Mark
Post 2 made on Wednesday September 24, 2008 at 10:16
Ron Aronson
Super Member
Joined:
Posts:
June 2002
3,967
You must have inadvertently changed the command code on either the remote or the recorder. See page 22 of the manual to correct this problem.

You can click here to download the manual and codes for your remote if you need one.
Post 3 made on Wednesday September 24, 2008 at 14:31
edmund
Elite Member
Joined:
Posts:
April 2002
13,469
It was the remote that was changed, when you see DVD 3 in the front panel, its telling you want codeset the recorder is actually set to, and DVD 3 is the factory default codeset for dvdr's.

You might want to switch the recorder to DVD 1 anyways, so more remotes will have a code that works it.
Post 4 made on Tuesday October 7, 2008 at 00:06
chainlu
Lurking Member
Joined:
Posts:
October 2008
1
Hi, I am facing the same problem -displays "DVD 3" on my RDR-VX525 while trying with sony remote RM-Y165. Please post/email how you could change the codeset so it is useful for all. Thanks

On September 24, 2008 at 14:31, edmund said...
It was the remote that was changed, when you see DVD 3
in the front panel, its telling you want codeset the recorder
is actually set to, and DVD 3 is the factory default codeset
for dvdr's.

You might want to switch the recorder to DVD 1 anyways,
so more remotes will have a code that works it.
Post 5 made on Wednesday October 23, 2013 at 17:05
ajklexi
Junior Member
Joined:
Posts:
October 2013
1
I solved this problem using a suggestion from another forum.. Hold the ENTER key and the #3 button simultaneously for 3 seconds. and you are good to go!


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse