Post 1 made on Thursday January 12, 2006 at 00:24 |
belwell Lurking Member |
Joined: Posts: | January 2006 1 |
|
|
It is a bit confusing at first, but getting a hang of the pc program thing. Still can't get express function to properly select the correct input of my tv. TV is a Sony Grand Wega. On the 3100 remote I had set up the macro to select ANT as a starting point the as many taps on the TV/Video button that were needed. Can't seem to make that happen on this remote. Also when using the wizard it includes commands to turn on the components first which I prefer to do manually. Any thoughts?
|
|
Post 2 made on Thursday January 12, 2006 at 11:21 |
cb1 Select Member |
Joined: Posts: | September 2002 1,663 |
|
|
If you still have your 3100, get into the preset mode, on an unused page "cable,md, dvr. whatever, enter in the code 4106, this gives you discrete inputs for your sony TV 1-6 are the inputs 0 is the tuner (or chan up) Now you can create a component page on yuou 4000 and teach these commands from the 3100 to the 4000. Go into edit actions on the express function and delete and add whqat you want. If you find out how to edit the all off function let me know. cb1
|
why have a nice system if you cant operate it, program the remote the right way the FIRST time! |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.