| Post 1 made on Tuesday November 29, 2005 at 17:43 |
superdave211 Lurking Member |
Joined:
Posts: | November 2005
1 |
|
|
Does anyone know if macro's can be programmed such that the last component entered into the macro is the device displayed on the LCD. As it stands now after the macro is finished I have to hit the Component butten and then press the device on the lcd. I know with my 3000 model I didn't have to do this extra step. Thanks,
|
|
| Post 2 made on Monday December 5, 2005 at 15:26 |
dwellersoul Lurking Member |
Joined:
Posts: | December 2005
1 |
|
|
I had this remote for maybe 3 days and from what I saw is that it has a custom page displayed after executing a macro. That page can be customized to include the buttons you need. For the most part it gets them right, but some tweaking might be required to get all that you want out of it.
Overall I was happier with this one then the AV3100, but it still had problems learning my TiVo controls, no fast forward 4 and 7 keys didn't want to be learned. The other problem I had was that the macros didn't always change my tv to the correct video source (it's a Sony TV too).
|
|
| Post 3 made on Monday December 5, 2005 at 22:10 |
cb1 Select Member |
Joined:
Posts: | September 2002
1,663 |
|
|
with those problems, why were you happier with it over the 3100?
not being a smartass, just courious.
cb1
|
why have a nice system if you cant operate it, program the remote the right way the FIRST time! |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
