Post 1 made on Sunday November 27, 2005 at 13:33 |
robtorris Lurking Member |
Joined: Posts: | November 2005 3 |
|
|
We recently purchased our RM-AV3100 for a Sony entertainment system. The codes in the manual don't cover the stereo (#STR-K5900P) which came with our new entertainment system. I sure would appreciate any help in this matter!
Thanks in Advance! Rob Orris ((>:
|
|
Post 2 made on Sunday November 27, 2005 at 13:45 |
edmund Elite Member |
Joined: Posts: | April 2002 13,840 |
|
|
Check the sticky thread at the top of the forum, you need to switch your receiver from AV2 to AV1 codeset, then the preset codes in the av3100 will work.
|
|
OP | Post 3 made on Monday November 28, 2005 at 10:28 |
robtorris Lurking Member |
Joined: Posts: | November 2005 3 |
|
|
Thanx for the quick reply Edmund. I did as you suggested, switching from av2 to av1 and my remote for the most part is operating my receiver, but the volume control still is't working quite right. I can turn my receiver volume down, but not up (the vol. up button not doing anything).
|
|
OP | Post 4 made on Monday November 28, 2005 at 10:53 |
robtorris Lurking Member |
Joined: Posts: | November 2005 3 |
|
|
I've also noticed that switching between av1 and av2 toggles the volume control problem from 'volume only down(av2) to volume only up(av1)'.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.