Your Universal Remote Control Center
RemoteCentral.com
Sony Remote Controls Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
How Do You Change Label Key Names On The AX4000
This thread has 3 replies. Displaying all posts.
Post 1 made on Friday November 11, 2005 at 00:17
thethrill
Lurking Member
Joined:
Posts:
July 2002
3
I have an AV3000 and you can scroll through 3 or 4 preset labels. I just upgraded to the AX4000 and I see it has multiple names on each key in the manual but I don't see how to scroll through them. Can somebody please help me?
Post 2 made on Friday November 11, 2005 at 09:10
Ron Aronson
Super Member
Joined:
Posts:
June 2002
3,966
When you say label keys in the title, I think you are talking about the square touch keys and not the rectangular label keys.

Looks like you might have to use the AX remote editor. See Option 2 on page 14 of the manual. I couldn't find anything else in the manual that tells you how to do it on the remote.

You could try the procedure used in the 3000/3100 remotes, which is: When you are in the learn mode, press and hold the component name key, then press the touch key repeatedly to scroll through the choices.

Don't know if this will work but it is worth a try. Let me know what happens.
OP | Post 3 made on Wednesday November 16, 2005 at 08:01
thethrill
Lurking Member
Joined:
Posts:
July 2002
3
On 11/11/05 09:10 ET, Ron Aronson said...
When you say label keys in the title, I think
you are talking about the square touch keys and
not the rectangular label keys.

Looks like you might have to use the AX remote
editor. See Option 2 on page 14 of the manual.
I couldn't find anything else in the manual that
tells you how to do it on the remote.

You could try the procedure used in the 3000/3100
remotes, which is: When you are in the learn mode,
press and hold the component name key, then press
the touch key repeatedly to scroll through the
choices.

Don't know if this will work but it is worth a
try. Let me know what happens.

Thanks Ron but I did try the procedure for the RM3000. But further reading into the manual indicated they were fixed (Bummer). So i just used the text labels at the bott
om of the screen to name the commands that were missing.
Post 4 made on Wednesday November 16, 2005 at 13:37
turbosquid
Long Time Member
Joined:
Posts:
October 2005
13
on any given device in the ax-4000 you only have 3 options for names for the square buttons on the touch screen..

when viewing the device in the ax editor you choose the button then to the right you will see the button by itself, click on it and you can choose which label to display.

d
Turbosquid, Geek


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse