Your Universal Remote Control Center
RemoteCentral.com
Sony Remote Controls Forum - View Post
Previous section Next section Previous page Next page Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Page 4 of 9
Topic:
SONY RECEIVERS: Changing Command Mode to AV1 (or AV2)
This thread has 120 replies. Displaying posts 46 through 60.
Post 46 made on Thursday January 25, 2007 at 00:11
gearybeyler
Long Time Member
Joined:
Posts:
January 2007
10
Thanks for this thread... I feel like I'm on the right track. How about the STR-DA5200ES? I have done tons of research online and can not find the procedure for setting this receiver to AV1.

Any help is much appreciated.

Thanks,
Geary
Geary
Post 47 made on Tuesday January 30, 2007 at 16:24
DenY
Lurking Member
Joined:
Posts:
January 2007
1
I didn't find my system on the list (HT-DDW900 (STR-K900, RM-AAP013)), but based on the information posted for other systems, I poked around and found a procedure that worked for me.

On the receiver (STR-K900):
1. Press and hold the INPUT MODE button.
2. While holding the INPUT MODE button, press the Power (I/O) button.
3. Each time you do this, the command mode will toggle between AV1 and AV2.

On the remote (RM-AAP013):
1. Press VIDEO1 button (for AV1) or the VIDEO2 button (for AV2) while pressing the RM SET UP button
2. The RM SET UP button flashes once for AV1 or twice for AV2, then the command mode switches.
Post 48 made on Sunday March 4, 2007 at 22:13
Maustin
Lurking Member
Joined:
Posts:
March 2007
3
I have a Sony DAV-DX255 Home Theatre and a Dish Network VIP622 DVR, I would like to use the DVR remote (5.3 IR Remote) to control my home theater system. I've tried the sony remote codes and the remote scan, but nothing works. I've been searching high and low to find a solution. I've read on this site that I must change the control function from AV2, sony's default, to AV1, but don't know if that is possible with this model of sony home theater. Any help is appreciated.
Post 49 made on Saturday March 24, 2007 at 04:53
narmen
Lurking Member
Joined:
Posts:
March 2007
1
Thanks DenY. That worked for my HT-DDW900 (STR-k900, RM-AAP013) too.

On January 30, 2007 at 16:24, DenY said...
I didn't find my system on the list (HT-DDW900 (STR-K900,
RM-AAP013)), but based on the information posted for other
systems, I poked around and found a procedure that worked
for me.

On the receiver (STR-K900):

1. Press and hold the INPUT MODE button.
2. While holding the INPUT MODE button, press the Power
(I/O) button.
3. Each time you do this, the command mode will toggle
between AV1 and AV2.

On the remote (RM-AAP013):
1. Press VIDEO1 button (for AV1) or the VIDEO2 button
(for AV2) while pressing the RM SET UP button
2. The RM SET UP button flashes once for AV1 or twice
for AV2, then the command mode switches.
Nick
OP | Post 50 made on Saturday March 31, 2007 at 20:30
Ron Aronson
Super Member
Joined:
Posts:
June 2002
3,967
Den Y: Thank you for reporting this, and even more for typing it in the exact format I needed to add it to the thread. Sorry it took so long, but sometimes I forget that people also post in this thread.

Maustin: You missed the part about not posting questions in this thread. If you still need an answer, please post in the Sony Remotes Forum.
Post 51 made on Wednesday April 4, 2007 at 17:08
MRaiford
Lurking Member
Joined:
Posts:
March 2007
1
FYI:

The STR-DG600 comes with the AAP012 remote, which is the same remote documented for the HT-7000DH and HT-7550DH with STR-K7000. Tried the instructions, and worked as expected for this remote.

(edit) Also, at least for this remote, the procedures are not needed for the Sony AX4000 remote, it has the codes for AV2 receivers (4107 under the Sony brand.)
Post 52 made on Thursday April 26, 2007 at 23:56
Pedro
Lurking Member
Joined:
Posts:
April 2007
1
I know you just said not to post a ? but I'm goin gto anyway. I have two sony receivers in my system. I would really like to control both of them independantly... I've looked and it seems that my receiver is the only one ever made that is not listed in your list... :( It is the STR-DE835. I've tried a couple different things and it doesn't seem taht Av1 av2 is selectable on this model. Can you confirm? For now I just manually unplug and re-plug in the other unit when I want to use it - and when I adjust volume, both receivers volume is adjusted simultaneously... Any help appreciated.

Mike
Post 53 made on Friday April 27, 2007 at 20:53
Mr Mod
Founding Member
Joined:
Posts:
August 2001
1,269
I have found no reference that would allow this model to be able to switch between AV1 or AV2
Post 54 made on Sunday May 6, 2007 at 12:15
catrafter
Founding Member
Joined:
Posts:
May 2002
26
Great thread!
Thanks to Ron and all who provide updates.
I used the STR-DG1000 procedure on my new STR-DA3200ES (RM-AAL003) and it worked perfectly. I was then able to program my AV-3000 to control everything.

The procedure is in the owner's manual (page 40), but I had overlooked it several times.
A quick search here fixed me right up.

Thanks again!
Tom

P.S. The DA-3200 sounds great!
OP | Post 55 made on Tuesday May 15, 2007 at 21:26
Ron Aronson
Super Member
Joined:
Posts:
June 2002
3,967
On May 6, 2007 at 12:15, catrafter said...
Great thread!
Thanks to Ron and all who provide updates.
I used the STR-DG1000 procedure on my new STR-DA3200ES
(RM-AAL003) and it worked perfectly. I was then able
to program my AV-3000 to control everything.

The procedure is in the owner's manual (page 40), but
I had overlooked it several times.
A quick search here fixed me right up.

Thanks again!
Tom

P.S. The DA-3200 sounds great!

Thank you, catrafter. I have added the STR-DA3200ES procedures.
Post 56 made on Tuesday June 19, 2007 at 02:10
jr2580
Lurking Member
Joined:
Posts:
June 2007
1
Just got a HR20-700S. Logitech 676 won't dance and now I can't get the Sony STR-DG600 code to enter in to the HR20 Remote AV1 - Any solution or codes to try. What remote will be best for Sam HL-85687W, Sony STR-DG600, HR20-700S and Pan DVD-S27U?

Thanks in advance
JRH
Post 57 made on Tuesday June 19, 2007 at 16:49
edmund
Elite Member
Joined:
Posts:
April 2002
13,471
On June 19, 2007 at 02:10, jr2580 said...
Just got a HR20-700S. Logitech 676 won't dance and now
I can't get the Sony STR-DG600 code to enter in to the
HR20 Remote AV1 - Any solution or codes to try. What remote
will be best for Sam HL-85687W, Sony STR-DG600, HR20-700S
and Pan DVD-S27U?

Thanks in advance

If its still set to AV2, then the code yo use is 31758. To get the volume: First there has to be a tv code programmed to the tv device, or the volume keys won't work. then:

1. av1 or av2
2. press and hold MUTE & SELECT for two blinks
3. enter 9 9 3
4. press VOL UP
Post 58 made on Monday December 17, 2007 at 21:09
brahamabullx
Long Time Member
Joined:
Posts:
December 2007
10
newb question, but can i use this guide to enable volume punch thorugh on my dish network remote? im trying to get volume from my sony surround sound reciever onto my dish network remote (instead of the TV volume). thanks
OP | Post 59 made on Saturday December 29, 2007 at 17:14
Ron Aronson
Super Member
Joined:
Posts:
June 2002
3,967
On December 17, 2007 at 21:09, brahamabullx said...
newb question, but can i use this guide to enable volume
punch thorugh on my dish network remote? im trying to
get volume from my sony surround sound reciever onto my
dish network remote (instead of the TV volume). thanks

You should post a new thread for this question since it is not related to the topic of this thread.
Post 60 made on Thursday January 10, 2008 at 13:08
nikkicola11
Lurking Member
Joined:
Posts:
January 2008
1
For the Sony STR-DG710:

On the Receiver:

1. Turn off receiver
2. Press and hold the INPUT button
3. Press the power button to toggle AV modes

Which was the same as the instructions for the STR-DA1000ES, STR-DA2000ES, STR-DA3000ES, STR-DA3100ES, STR-DA5000ES, STR-DA9000ES, STR-DB790, STR-DB795 .

:)
Find in this thread:
Page 4 of 9


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse