Post 1 made on Monday December 20, 1999 at 09:32 |
Steve Schulman Historic Forum Post |
|
|
Hi:
I tried all the suggested codes listed with the Sony RM-Y802 to control my Hitachi VCR but have had no luck.
Anybody have a suggestion?
Thanks,
Steve
|
|
OP | Post 2 made on Monday December 20, 1999 at 14:39 |
Daniel Tonks Historic Forum Post |
|
|
Hmm, how old is the VCR? I've had pretty good success with my Hitachi VCR & Sony equipment, however if you have it set to "VCR B" you'll find very few remotes will work.
|
|
OP | Post 3 made on Monday December 20, 1999 at 15:19 |
Steve Schulman Historic Forum Post |
|
|
The VCR is 3 years old. What is "VCR B"? I don't know if it is set to it. The Sony remote came with the SAT50D model of receiver. It uses RF but can be switched to IR.
Thanks
|
|
OP | Post 4 made on Monday December 20, 1999 at 15:32 |
Daniel Tonks Historic Forum Post |
|
|
Some Hitachi VCRs had both A & B code sets (so you could run two in the same room). I have two, and the Code B set is very rare to find on a pre-programmed remote. Just a thought in regards to your problem. I know recent models don't have this. You've come across the real problem with pre-programmed remotes: if what you need isn't there, it simply isn't there.
With that said, I'm surprised it doesn't work. I don't think Hitachi has changed it's main code set in years and years.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.