On February 2, 2010 at 17:52, BillFromGI said...
After the baluns using a coupler (splitter). However, using a coupler/splitter will cause a 3dB loss of signal, so try this....
Tie the two 2-bay's together with a chunk of 300ohm wire, then connect a balun in the middle of that 300ohm wire. Hope that makes sense.. .
I need to find first where I can get about 15' of bare 12g copper wire, tried home despot, they had 65,536 different kinds of wire, everything BUT what I wanted. Thought okay, how about some Romex, 100' for $125 seemed a little much when I only need 15'.
With a 2 bay do you cross the wires in the middle?