Your Universal Remote Control Center
RemoteCentral.com
HDTV Reception Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Olevia Code for Dish Network
This thread has 7 replies. Displaying all posts.
Post 1 made on Thursday December 28, 2006 at 05:05
apsuhead
Lurking Member
Joined:
Posts:
December 2006
2
I have a new Olevia 27" High-Definition Widescreen LCD TV and I cannot program my Dish Network remote control to work with my new TV. I tried the Olevia website and tried the codes for RCA, Yamaha, etc. and also tried to manually cycle using my remote but no luck. Dish network website doesn't have any codes for Olevia either. Can anyone help me?
Post 2 made on Wednesday March 28, 2007 at 10:28
Skycop
Lurking Member
Joined:
Posts:
March 2007
2
Looking for the same ...I have the 37 Inch Olevia and I tried the same as well. No luck at all.
Post 3 made on Saturday March 31, 2007 at 21:56
tvq
Lurking Member
Joined:
Posts:
March 2007
2
I have a 37 inch Olevia 237 and cannot find the remote code published anywhere, the site recommends other manufactureer's codes, but those do not work for the newer series? WTF? Any recommendations?
Post 4 made on Friday December 14, 2007 at 15:58
gr8bigdog1
Lurking Member
Joined:
Posts:
December 2007
1
I am having the same problems only on the 32 inch model. Does anyone have a solution?
The Big Dog
Post 5 made on Tuesday December 18, 2007 at 10:30
RAJ484
Lurking Member
Joined:
Posts:
December 2007
2
What remote are you trying to program? 6.0, 6.1, 8.0? The codes for Olevia are 506 & 127 but I havent gotten them to work with my TV either. I dont know if going to a different version of the dish remote will help. I have the 6.0 IR/UHF Pro remote
Post 6 made on Thursday December 27, 2007 at 02:26
pedroivo
Lurking Member
Joined:
Posts:
December 2007
3
I had this problem with that tv brand when I worked for Dish Network but U can try this.
Enter in the program mode at the Dish remote (press and hold the button for the device you want program) then press de power button (you'll see the device light on at the remote) then instead of put codes, just press and release the up arrow (Ch up) and keep doing that until the device turn off (have the device on before start the program mode). Then press the # key. That works to program TVs, VCRs and DVDs. I hope this help you guys.
OP | Post 7 made on Sunday August 16, 2009 at 16:35
apsuhead
Lurking Member
Joined:
Posts:
December 2006
2
I finally got a code to work for this TV ... years later!

My 27' Olevia 427-S11 TV to my dish network Dual HD DVR receiver. I updated my firmware through the Olevia site and then code 910 worked!!! Finally
Post 8 made on Monday February 21, 2011 at 22:46
ozzman
Lurking Member
Joined:
Posts:
February 2011
1
it works. thanks


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse