Your Universal Remote Control Center
RemoteCentral.com
HDTV Reception Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Volume Control
This thread has 3 replies. Displaying all posts.
Post 1 made on Tuesday September 13, 2005 at 21:06
GuitarGuy
Lurking Member
Joined:
Posts:
September 2005
3
Anybody out there know how to control the volume on a Sony STR-D1015 receiver using a Direct TV remote control RC16?
Or, how about the original codes or instructions on how to re-program the original
RM-P341 remote for the receiver?
Unable to control volume on the receiver with either remote.

Thank you for any help.

GuitarGuy.
Post 2 made on Tuesday September 13, 2005 at 23:57
Ernie Bornn-Gilman
Yes, That Ernie!
Joined:
Posts:
December 2001
30,104
Try the Sony remote control forum. That is really for Sony's programmable and learning remotes, but chances are good that someone's expertise will shine and you will have an answer pronto. No pun intended.

Also, you seem to be asking about something that should just plain work. It might help if you went into more detail. Why are you specifying RC16? Is that a remote control model or a remote control code? (RC code)

What have you done that the original remote needs to be reprogrammed with the original codes...seems it would have them. Or that it needs to be UNprogrammed, which is basically RESET. Have you searched the Sony site for an instruction manual for the receiver or remote, in case you don't have them, to find out how to do a reset on the remote? I think if a remote USED to (you don't say it EVER did) control the volume but does not now, a reset would fix it.
A good answer is easier with a clear question giving the make and model of everything.
"The biggest problem in communication is the illusion that it has taken place." -- G. “Bernie” Shaw
Post 3 made on Wednesday September 14, 2005 at 00:41
edmund
Elite Member
Joined:
Posts:
April 2002
13,838
The RC16 is remote for the D10 sat receiver. To restore the Aud vol to the AV1 or AV2 device, do the following;

1. set it to AV1 or AV2, whichever has the Sony code.
2. press and hold SELECT & MUTE for two blinks
3. enter 9-9-3
4. press VOL DOWN.
OP | Post 4 made on Wednesday September 14, 2005 at 10:17
GuitarGuy
Lurking Member
Joined:
Posts:
September 2005
3
Hey, thanks for the help.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse