Your Universal Remote Control Center
RemoteCentral.com
HDTV Reception Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Direct TV d10 remote codes.
This thread has 10 replies. Displaying all posts.
Post 1 made on Monday March 14, 2005 at 01:47
mecca32
Lurking Member
Joined:
Posts:
March 2005
1
I just got Direct TV installed. I have the d10 reciever and I cannot get my universal remote to work with it. My universal is a RCA rcu811 Learning Remote. Any suggestions?
Post 2 made on Monday March 14, 2005 at 02:11
edmund
Elite Member
Joined:
Posts:
April 2002
13,838
There is no code, so you'll need to learn the commands.
Post 3 made on Monday December 26, 2005 at 15:44
deltaqueen
Lurking Member
Joined:
Posts:
December 2005
5
I have a direct tv remote that i am borrowing from a friend. They have the same type of Direct Tv system as I do but i can not get their remote to work with my reciever. Any suggestions?
Post 4 made on Monday December 26, 2005 at 15:51
edmund
Elite Member
Joined:
Posts:
April 2002
13,838
If this is the white remote, try using code 00001.

1. switch DTV device
2. press and hold MUTE & SELECT for two blinks
3. enter 0-0-0-0-1

You wouldn't happened to have H10 receiver?
Post 5 made on Monday December 26, 2005 at 16:01
deltaqueen
Lurking Member
Joined:
Posts:
December 2005
5
how do i tell what type of reciever i have
and i tried the mute select and 0001 and it did not work.
any more suggestions?
I meant 00001.
my remote is white and black

Last edited by deltaqueen on December 26, 2005 16:11.
Post 6 made on Monday December 26, 2005 at 16:11
edmund
Elite Member
Joined:
Posts:
April 2002
13,838
The brand & model # is on back or bottom of the receiver.

Is this the remote?

Post 7 made on Monday December 26, 2005 at 16:13
deltaqueen
Lurking Member
Joined:
Posts:
December 2005
5
yes thats my remote. the model # is DSX5500
ITS PHILIPS
Post 8 made on Monday December 26, 2005 at 16:23
edmund
Elite Member
Joined:
Posts:
April 2002
13,838
If this remote is from your Friends receiver then its useless. If its missing the Format key under the TV input key on the top left of the remote, then this is RC16. Which only accepts SAT codes 00001-00004, and those work only on the D10 series of sats.

If your remote has the format key, then try code 00099.
Post 9 made on Monday December 26, 2005 at 16:27
deltaqueen
Lurking Member
Joined:
Posts:
December 2005
5
DO I HIT ENTER AFTER PUTTING THE NUMBERS IS
AND i DO HAVE A TV FORMAT KEY ON THE RIGHT SIDE
Post 10 made on Monday December 26, 2005 at 16:35
edmund
Elite Member
Joined:
Posts:
April 2002
13,838
No, just follow the steps in my first post, but enter 00099, if the remote takes the code it will blink twice.
Post 11 made on Monday December 26, 2005 at 17:09
deltaqueen
Lurking Member
Joined:
Posts:
December 2005
5
it blinked with 00001 but it will not change the chan.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse