hello, i have the TRK S23 oval dish with two dual LNBs' and i have purchased the extra SAT C for receiving the Showtime HD channel, my kit came only with screws and the LNB and after inserting the LNG and changing the setting to 3 LNB in the menu i get no signal....if someone could help me i would appreciate it....thanks =)

You were also suppose to get a combiner. It looks like a splitter. If you didn't get that then that is your problem,plus I would like to know how you hooked it up if that wasn't included.

If it was included and you forgot to mention it the 110 has to be on the 18 volt side of the 119. Maybe you have it on the 13 volt side?

I am also assuming this was working as a dual dish before and you are using a 22khz multi-switch?

My dish has an integrated switch so I did not need the combiner. I just removed the small cover, plugged the Sat-C LNB into the arm and bolted it in. I spent more time dragging the ladder out. I was very careful not to bend the center conductor that goes into the LNB. That could be Dasghar's problem.

-Robert

The Sat C kits I use have a gelatin like substance that is great helping with conductivity. You put it in the LNB carraige. Put that in if you have not already. Also I've noticed cranking the hell out of that phillips holding in C helps. Good Luck.