Your Universal Remote Control Center
RemoteCentral.com
General Consumer Remotes Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Help me with this remote request for RCA tv!!!
This thread has 1 response. Displaying all posts.
Post 1 made on Tuesday October 22, 2019 at 06:00
alexk345
New Member
Joined:
Posts:
October 2019
2
I need to have dedicated button for all the input ( hdmi , composite , component)

At present i click source input and scroll thru menu.) its ok if its one tv. i am checking 4 tv's same time. so i want to have single button for hdmi.

let me know anyone of you have idea to implement that into RCA existing remote
Post 2 made on Tuesday October 22, 2019 at 16:21
edmund
Elite Member
Joined:
Posts:
April 2002
13,601
The original remote is preprogrammed only, can't be changed. If your tv responds to discrete commands it have to come from a different remote. 190's rca give their inputs cable ch #'s, either down channeling from 2, or enter codes 091 would get you an input. But there were no hdmi back then.

As for the rca, recently I was stuck using my nephew's rca, it had no discretes available at all. I had to program four keys to get around input menu, 1. input . cursor up 3. cursor down 4. ok .

Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse