Your Universal Remote Control Center
RemoteCentral.com
General Consumer Remotes Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
IR Signals not computed by Roku Premiere
This thread has 4 replies. Displaying all posts.
Post 1 made on Friday June 16, 2017 at 14:30
mab77
Junior Member
Joined:
Posts:
June 2017
2
Hello guys,

It's my first post so I hope I'm on the proper Topic.

I'm trying to control the last Roku Premiere via IR signals but without success so far.

With my company we are used to control Rokus via IR signals from the Roku 1 to the Roku 4.
Even if the remote controllers of the Roku 3 and 4 are WiFi (for what I found in my research), the boxes are computing IR signals.

Unfortunately, things seems to be different with the Roku Premiere. I'm not able to control it in the same way than the Roku 3 or 4. Is someone knows if the Roku Premiere is still able to works with IR signals?

Thanks for your help,
Post 2 made on Friday June 16, 2017 at 23:46
mdavej
Active Member
Joined:
Posts:
December 2002
608
Yes it is IR compatible. Roku site specifies IR compatible for both the Premiere and Premiere +. Obviously, you can't learn any IR from a Premiere + remote, so you'll have to use built in codes or pronto hex or whatever you IR remotes typically use. All Rokus use exactly the same IR codes.

And obviously, the Roku will have to be line of sight to control it via IR.
Post 3 made on Saturday June 17, 2017 at 17:04
Shaner
Long Time Member
Joined:
Posts:
October 2012
118
Yes, it is controllable with the existing Roku codes but I have yet to find a way not to get double hits on the cursor controls. I've tried numerous codes but have not exhausted all of them. I wasn't successful with the "2016 models" commands that others have reported having success.

I end up turning off repeats and then they work well - just no continuous scrolling.
Post 4 made on Monday June 19, 2017 at 14:13
mdavej
Active Member
Joined:
Posts:
December 2002
608
These should work better. Must log in to download.

[Link: remotecentral.com]
OP | Post 5 made on Monday June 19, 2017 at 19:16
mab77
Junior Member
Joined:
Posts:
June 2017
2
Thanks to you both for you answers.

Indeed it's working, my IRTrans was misconfigurated and also it was very hard to find the IR receiver on the box.

Also I confirm that I'm using the Roku 3 remote controller mapping on the Premiere Plus and it's working fine.

Thanks again, this topic can be closed


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse