OK,
These signals are the Aiwa IR protocol, device 80, subdevice 0
Function Number EFC
Power 0 40250
Display 10
40298Mute 23
40402Direct 5
40346EQ 11
40426REF 12
40202Damping 6
40282Level dn 27
40418Level up 26
40290Many JP1 capable remotes can shoot these signals.
The most flexible remote is the
OARUSB04G, because it can be computer programmed through its USB connector, so you'll be able to send any IR protocol. However, you will need to learn to use the free RMIR software.
Or get a an
Atlas 1056B01 (don't get 1056B03) or
RCRP05B. These last two can be manually programmed, or computer programmed after buying a <$10 interface cable.
Here's how to manually program the remotes.
Assign Setup code 1405 to the Audio button
1) Press Audio2) Press Setup until 2 blinks
3) Enter 1405 --should get two blinks
Manually program buttons of your choosing (except device buttons)
1) Press Audio
2)
Press Setup until 2 blinks
3) Enter 994 -- 2 blinks
4) Tap Setup (don't hold it)
5) Enter a 5 digit EFC from above
6) Press the button you want this function on
The remote should blink twice