|
|
|
General Consumer Remotes Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
Topic: | Entering Secret Codes This thread has 3 replies. Displaying all posts. |
|
Post 1 made on Wednesday January 14, 2015 at 19:42 |
Herman Trivilino Long Time Member |
Joined: Posts: | February 2007 292 |
|
|
Some of the less expensive consumer remotes have full learning capabilities, but without computer programming capability there is no way to get these "secret codes" into these remotes. These are codes such as discrete on/off or input codes that don't appear on the OEM remote.
One way around this is to have a more expensive remote on hand, get the codes into it using its programming capabilities, and then teach those commands to the less expensive remote.
I'm thinking though, that there might be a better way. I just bought a Flirc. It's a little USB dongle that plugs into a computer and learns remote control commands using an IR receiver. I'm wondering if that process could be reversed. That is, plug an IR emitter into a computer. Download those secret codes onto that computer, and then teach them to that cheap remote.
Is there any way to accomplish such a thing?
|
Origin: Big Bang |
|
Post 2 made on Thursday January 15, 2015 at 01:37 |
mdavej Active Member |
Joined: Posts: | December 2002 627 |
|
|
Most remotes made by UEI (One-for-all, some RCA, Inteset, and OEM cable TV remotes) can be programmed with "secret codes" for discrete on/off and input commands directly from the keypad, no computer required (we call them EFCs or magic codes). These remote range from about $3 on ebay to $25 retail. So you could use a cheap remote to teach another cheap remote (or simply replace that cheap remote with a far more functional cheap UEI remote).
I use device called the IR Widget which captures, analyzes and produces codes that can be keyed into a UEI remote which could then be used for teaching. Those remotes can also be programmed or read by a PC via an $8 cable from ebay. That's using JP1 software called Remote Master, IR Scrutinizer and IR Scope. In that case a cheap UEI (JP1) remote could be used instead of a Widget.
IR Scrutinizer may be able to read and translate Lirc format to other formats, but I'm not sure about that. To do what you suggested would require an IR transmitter, which most computers do not have.
|
|
Post 3 made on Thursday January 15, 2015 at 14:12 |
Barf Long Time Member |
Joined: Posts: | August 2013 350 |
|
|
IRScrutinizer can do that for you, together with a *supported* IR sender (presently GlobalCache, IrToy, Arduino, wave-device with IR-LEDS, (patched) Lirc server, or IrTrans). It can import most of the common formats, including Lirc.
|
|
|
OP | Post 4 made on Tuesday January 20, 2015 at 15:15 |
Herman Trivilino Long Time Member |
Joined: Posts: | February 2007 292 |
|
|
Thanks for the replies. A lot of information to digest ...
|
Origin: Big Bang |
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|