Your Universal Remote Control Center
RemoteCentral.com
General Consumer Remotes Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Living Solutions Jumbo remote need codes
This thread has 4 replies. Displaying all posts.
Post 1 made on Friday January 18, 2008 at 16:32
gfolja
Lurking Member
Joined:
Posts:
January 2008
1
I have the Living Solutions Jumble remote model A17G0200 (item:564351). This remote does not have an OK button or a Code button. Like everyone else I lost the paper work to this remote and I don't have the codes or the instructions on how to program the remote. I would be most grateful for any help. I need the instructions, and codes for a Sony Trinitron television, Scientific Atlanta cable box, and Magnavox vhs dvd combo. Or if someone could scan the paper work, and make it available to everyone,or email them to me [email protected]
Many thanks in advance.
gfolja
Post 2 made on Sunday December 14, 2008 at 15:31
coellaneel
Lurking Member
Joined:
Posts:
December 2008
1
i need the codes for this same remote, Living Solutions model A17G0200 item: 564351
the tv is sanyo but would appreciate it if anyone knows where to find all codes for tv's and vcr's. thanks a bunch, email [email protected]
Post 3 made on Saturday February 14, 2009 at 21:20
cwg138
Lurking Member
Joined:
Posts:
February 2009
1
Well, I can tell you HOW to enter the codes // however, the only code ledger I found for for an older non-touch screen model, and they did not work for me.

All you have to do , is select the device on the top of the remote. TV VCR DVD, etc.

Then hold down the device button for like 3 seconds ( e.g. Hold the TV button for 3 seconds ) until it stays lit up. Then you enter the 3 digit code from the manual, and the device light will fade. and it's supposed to work.

I dunno, maybe the sensor on the front of my remote is bad. I did not have any luck with those older codes, and by theory they should work. If anyone has any input please reply. Thanx
Post 4 made on Saturday May 9, 2009 at 22:43
GERemoteUser
Lurking Member
Joined:
Posts:
May 2009
5
To code a certain device (TV, DVD, VCR, etc.) press and hold the TV, DVD, VCR, etc. in for 3-5 seconds, input the 3-digit code, press the power button to test the device to make sure the device responds.

I, myself, lost my manual that's in my room somewhere. If I find it, I'll scan the whole manual, setup a PDF file, send you the file, and you'll be happy. I know this thread is almost 3 months old, but that's basically it.
Post 5 made on Sunday May 10, 2009 at 05:44
djy
RC Moderator
Joined:
Posts:
August 2001
34,746
Why not just download the file from the files section?


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse