Your Universal Remote Control Center
RemoteCentral.com
General Consumer Remotes Forum - View Post
Previous section Next section Previous page Next page Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Page 1 of 10
Topic:
Innovage Jumbo Universal Remote
This thread has 143 replies. Displaying posts 1 through 15.
Post 1 made on Friday March 30, 2007 at 14:14
Helpersa2003
Lurking Member
Joined:
Posts:
March 2007
1
I have an Innovage Products Jumbo Universal Remote and do not have a manual. Can someone please give me the TV codes for Sanyo? In addition, please let me know what I need to do step-by-step to enter the codes. Finally, can someone let me know where I can secure a remote control manual of my own for this remote (telephone number, e-mail address, etc.).
Post 2 made on Monday April 2, 2007 at 17:40
dking
Lurking Member
Joined:
Posts:
April 2007
1
The codes are 004,013,049,108,110,180,209. Turn on tv, aim remote control at the tv and press down and hold CODE SEARCH for 3 seconds until the red LED lights up solid red. Press the tv button and the LED button will blink once and then remain red. Enter the 3 digit number, the LED light will turn off. Press the on/off key, if it turns off, then it worked, if not try with another code. You have 30 seconds to enter the code.
Post 3 made on Monday April 2, 2007 at 20:26
valshouse
Lurking Member
Joined:
Posts:
April 2007
2
RE: the jumbo universal remote control, would you please give me the codes for ProScan?
Post 4 made on Thursday April 5, 2007 at 13:12
jhenderson421
Lurking Member
Joined:
Posts:
April 2007
1
i have a magnavox

can anybody help me with the codes?
thanks in advance
Post 5 made on Thursday April 5, 2007 at 23:02
OTAHD
Super Member
Joined:
Posts:
October 2005
4,679
On April 2, 2007 at 20:26, valshouse said...
RE: the jumbo universal remote control, would you please
give me the codes for ProScan?

Sorry, a bit late, but Proscan was manufactured by Thompson, who also made RCA and GE.
LET'S GO BUFFALO!!!
Post 6 made on Friday April 6, 2007 at 09:30
Kupakai
Long Time Member
Joined:
Posts:
September 2006
230
I mentioned this in another post, and I can't verify it since I don't have this remote, but from some of the codes and instructions that others have posted, it seems like the Jumbo remote uses a subset of Jasco/GE universal remotes listed here. It doesn't have all the codes listed, but try it as a starting point.
Post 7 made on Friday April 6, 2007 at 14:55
fishyfish123
Lurking Member
Joined:
Posts:
April 2007
2
Does anyone know how to use the code search function? It be nice if i could find that out so i didnt have to even bother with the codes. I have the remote that doesnt have the code search button on it but i know there a way printed in the manual that tells you how to search for codes.
Post 8 made on Saturday April 7, 2007 at 11:37
mouser
Lurking Member
Joined:
Posts:
April 2007
1
I need the codes for a Sanyo vcr for the Jumbo universal remote by innovage help please?
Hiw how is it goin i dont know what this is aboutHiw how is it goin i dont know what this is aboutHiw how is it goin i dont know what this is about
Post 9 made on Tuesday April 17, 2007 at 00:02
voochman
Lurking Member
Joined:
Posts:
April 2007
5
On April 7, 2007 at 11:37, mouser said...
I need the codes for a Sanyo vcr for the Jumbo universal
remote by innovage help please?

Sanyo VCR = 023, 042, 043, 079, 134

Last edited by voochman on April 17, 2007 00:14.
Post 10 made on Tuesday April 17, 2007 at 00:08
voochman
Lurking Member
Joined:
Posts:
April 2007
5
On April 2, 2007 at 20:26, valshouse said...
RE: the jumbo universal remote control, would you please
give me the codes for ProScan?

I assume you meant ProScan TV... 000, 015, 031, 107
Post 11 made on Tuesday April 17, 2007 at 00:10
voochman
Lurking Member
Joined:
Posts:
April 2007
5
On April 5, 2007 at 13:12, jhenderson421 said...
i have a magnavox

can anybody help me with the codes?
thanks in advance

I assume you meant for a TV...
Magnavox TV = 004 008 009 062 068 069 074 075 077 089 163 165
Post 12 made on Friday April 20, 2007 at 15:09
Ernie Bornn-Gilman
Yes, That Ernie!
Joined:
Posts:
December 2001
30,104
I have a variety of one of these, the CADE Products International Model 00134.
It is so old it has no satellite codes in the book. I bought it as a joke but still would like it to work, so I found an email address and wrote to the manufacturer. They are at [email protected]. Maybe we should all write to them!

Anyway, code search appears two different ways in my manual. There is a special method for TV only that does not work at all. The generic way is

Hold CODE SEARCH until the red LED stays on.
Push the button for the device you want to search for. The light blinks once.
Push Power repeatedly. Each subsequent push is a different code and the light blinks once.
When the code works, push the Enter button.
when you have gone through all of the codes for that device, the LED goes off.
A good answer is easier with a clear question giving the make and model of everything.
"The biggest problem in communication is the illusion that it has taken place." -- G. “Bernie” Shaw
Post 13 made on Friday April 20, 2007 at 15:32
Ernie Bornn-Gilman
Yes, That Ernie!
Joined:
Posts:
December 2001
30,104
On April 20, 2007 at 15:09, Ernie Bornn-Gilman said...
They are at [email protected]. Maybe we should all
write to them!

No, they're not. That email bounced back.

But on the same web page there is an odd order form. You enter all your info and they call you back. Or maybe email (this company is in the UK).

So I filled out a freakin' order form, price 14.99 pounds. When they call me back, I'll quiz them about models and who knows, maybe order one. Seems like I could sell some for them if they'll work the DirecTV units!
A good answer is easier with a clear question giving the make and model of everything.
"The biggest problem in communication is the illusion that it has taken place." -- G. “Bernie” Shaw
Post 14 made on Friday April 20, 2007 at 16:04
edmund
Elite Member
Joined:
Posts:
April 2002
13,838
Ernie, they don't work with current line-up directv receivers. But one to find out that very queston.

Directv does sell a big button remote: The middle remote in picture:


Post 15 made on Sunday April 22, 2007 at 16:29
UFCFan63
Lurking Member
Joined:
Posts:
April 2007
1
Can anyone help me out. I bought this remote as a joke for my husbnad, but I actually want to program it to work. I am having the most difficult time getting it to work with my DIRECT TV box. I have tried all of the codes (200-217) and even sat here and did a code search for almost twenty minutes.
Any advise for a new remote owner.
Thanks in advance.
Find in this thread:
Page 1 of 10


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse