I have been searching high and low for this code. Directv couldn't help me. I am looking for the code for a SV2000 WV20D5, this is made by Funai Corp. for Walmart.

Can anyone help me?

Thanks,
BRZ

Try codes 20675, 21268, and 21334.

Thanks Edmund but these did not work. When I entered them in to the rc23 I did not get the double blink from the green led in the remote to tell me it accepted the code.

I tried all 3 to no avail.

Can anyone help me with these codes?

I am looking for the code for a Funai Corp., SV2000, model wv20d5. These are manufactured for Walmart by Funai. From what I have been able to research from the web these were made a a doorbuster for Walmart. It is a combo TV/DVD 20" CRT flat screen.

Thanks!

BRZ

Try a codesearch on either av1 or av2 devices, but not for power, try searching by vol, like so:

1. av1 or av2
2. press and hold MUTE & SELECT for two blinks
3. enter 9-9-1, wait two blinks
4. enter 2
5. press and release VOL UP
6. with Tv on, keep pressing and releasing the CH UP key, if and when the vol changes
7. press SELECT to lock in code

To punch-through the vol to all devices:

1. av1 or av2
2. press and hold MUTE & SELECT for two blinks
3. enter 9-9-3
4. press SELECT

If you don't come up with a working code, then there isn't one to find, sorry.

If the remote that came with the TV look like the one this page, you should be able to get most keys to work with 20821 code set on AV1 or AV2, NOT on TV.

But for the vol keys to work, there needs to be some tv code programmed to the tv device.

Kupakai, you are THE man. This worked perfectly! Thank you thank you thank you.

BRZ

[Link: forums.directv.com]

me, tivoburkee

well the codes worked for me so thanks but what do i have to do to get the volume to work my button went out so until i get it fixed i need a code to lower the tv. the kids raised the volume way too much to i need a code for my directv dvr remote to work i have checked all the codes on the directv.com and on the dvr.

To punch-through the vol from either av1 or av2 to all devices do the following: First there has to be some tv code programmed to the tv device, then:

1. av1 or av2
2. press and hold MUTE & SELECT for two blinks
3. enter 9-9-3
4. press SELECT

can you give me instruction from the very beginning to what i am suppost to do i tryed i think what you said but it did not work so i want to start from the very beginning. thanks

the tv is a tv/dvd combo all the buttons work for the dvd and power on/off but wheni press the volume up/down or mute does not work. irma

after 2 hrs. i got it here is exactly what i did .

1. put tv on av1
2. hold down the mute and select button until the light blinks twice.
3. then type in 20821
4. then press select.
this will make the dvd functions work and tv power on/off but not the volume

for volume do the following...
5. then hold down the mute and select button until the light blinks twice.
6. then type in 993
7. then select and the volume will work now.

I have a similar issue but my model # is CSV20PFD SV2000. I have a digital box hooked up to it and I'm using that remote to change channels but I can't turn the tv on and off, adjust volume or use the dvd functions.

I tried to do the same thing you did but I couldn't even get the 2 blinks and I'm not sure if I have it on Video 1 since I can't use the remote to see (I'm not very techy as you can tell I'm sure)

Can someone help?

Tks

I want to thank Edmund for the code to the SV2000. The code 20675 worked for me with my Directv remote and my SV2000 DVD Recorder. I couldn't find it when I would use the search and there aren't any codes listed for SV2000 in my manual but this code works great including the volume too. So a big THANKS Edmund for giving the code I needed!