Your Universal Remote Control Center
RemoteCentral.com
General Consumer Remotes Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Philips CLO19
This thread has 12 replies. Displaying all posts.
Post 1 made on Monday November 27, 2006 at 21:50
Theolis
Lurking Member
Joined:
Posts:
November 2006
3
Hey guys, I'm looking for the codes for a Philips CLO19 (is that a "O" or a "zero"?). I've done several searches on this website and through google but no one seems to have any info on this remote.

I'd even settle for a way to use the code search on this model. I've tried the
-Hold Code Search
-Press and release the button for the device you want to set up (TV)
-Press and release the channel button until your device responds
-Press and release mute

This process did not work. The codes and/or any information would be great. Thanks!
OP | Post 2 made on Monday November 27, 2006 at 23:03
Theolis
Lurking Member
Joined:
Posts:
November 2006
3
Okay so I figured out how to get the code search to work. After reading the steps for a different model of remote I figured I'd give it a shot. The following worked for my Philips CL019:

[1] Ensure the device you're setting is powered on
[2] Press and hold the Code Search button until the red led is solid
[3] Press the button for the device you want to set (DVD or TV or Cable)
[4] Press and release the "Power" button on the remote until the device you're setting turns off
[5] Press the "Enter" key to set the code
[6] Rinse and repeat for your other two devices
Post 3 made on Tuesday November 28, 2006 at 03:40
djy
RC Moderator
Joined:
Posts:
August 2001
28,542
Interestingly this thread (not two steps away from yours) deals with an enquiry regarding a CL019.
The Met Office: more useless than a dead octopus.
OP | Post 4 made on Tuesday November 28, 2006 at 15:23
Theolis
Lurking Member
Joined:
Posts:
November 2006
3
Yeah that was the only post I could find with any info for the CL019. As a side note I found the book with all my codes for this model. I'll in the process of copying the codes into my computer. Will have them available for those who need them.
Post 5 made on Monday December 11, 2006 at 14:08
LWagner
Lurking Member
Joined:
Posts:
December 2006
1
Hi,
I have the same problem that you did a Phillips Universal Remote #CL019 with no code for a Energy Star Television. Do you happen to have the code? Thank you!
Post 6 made on Tuesday December 12, 2006 at 04:10
djy
RC Moderator
Joined:
Posts:
August 2001
28,542
On December 11, 2006 at 14:08, LWagner said...
Hi,
. . . a Energy Star Television.

Is that a make or a compliant TV? If, as I assume, it's the latter, I think we'll be needing a little more information.
The Met Office: more useless than a dead octopus.
Post 7 made on Wednesday December 27, 2006 at 20:11
Harmon0807
Lurking Member
Joined:
Posts:
December 2006
2
I have a philips remote #CL019. Need code for an Apex tv. Can anyone help?
Post 8 made on Friday January 18, 2008 at 11:52
Nobody0707
Lurking Member
Joined:
Posts:
January 2008
1
Hi. I'm unsure if anyone still checks this thread. But my problem with the CL019 remote is that it does not work on the Philips TV w/ built-in Magnavox VCR. I've tried the codes listed for both brands and have tried the Code Search using Channel Up/Down and Power button. And even though it works with my Sansui TV and Sylvannia VCR/DVD Player, it does not work with the Philips TV. After so many presses using Code Search, the light finally flashes four times and then turns off. It wouldn't be so frustrating, but a couple months ago, I was able to program the remote for the Philips TV and Sansui TV interchangeably with no problems. Any assistance would be appreciated. Thanks,

Brandon
Post 9 made on Sunday March 23, 2008 at 13:57
ropka0200
Lurking Member
Joined:
Posts:
March 2008
1
Hi me too my code list for PHILIPS CL019. can you help me
Robert
Post 10 made on Wednesday June 11, 2014 at 16:52
csmmmmad
New Member
Joined:
Posts:
June 2014
3
Theolis,
I don't mean to sound dumb here; but what does "rinse and repeat mean"? Wouldn't that cancel the previous input?
Post 11 made on Wednesday June 11, 2014 at 16:56
csmmmmad
New Member
Joined:
Posts:
June 2014
3
Theolis,

I tried what you posted...I got the solid red light but my remote won't power off.
Also, I don't mean to sound dumb here; but what does "rinse and repeat mean"? Wouldn't that cancel the previous input?
Post 12 made on Wednesday June 11, 2014 at 20:23
csmmmmad
New Member
Joined:
Posts:
June 2014
3
Yeh, but it doesn't work
Post 13 made on Thursday June 12, 2014 at 05:16
edmund
Elite Member
Joined:
Posts:
April 2002
13,158
Theolis posted 8 years ago, this forum doesn't have subscribe to feature, so he isn't being informed of your posts, sorry.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse