hi all good people
i have lost my GE geu401 remote control book
i cant reprogram it plz plz plz
help just to know how to program it with out codes even
thanks

rene

If it helps, this is what the remote looks like...

This is a loooong shot, but try the following:

(1) Obtain a One-for-All three-digit set up code for the device you want to program, for example from Rob's site ( www.hifi-remote.com ) or from the archives at www.oneforall.com. Note that you need the three digit codes that were used with the older models, not the newer four-digit codes.

(2) Add 17 to it.

(3) Press and hold "set up" until the LED blinks (or lights steadily, I'm not sure which)

(4) WHILE CONTINUING TO HOLD DOWN "set up", enter the three digits you got at step 2 above.

Remember, this is an old remote, it may not have many of the newer devices or codes in it.

Hope that works!!!

As you can see from the following (very old) threads, people have been looking for these codes before, without success...

[Link: remotecentral.com]
[Link: remotecentral.com]
[Link: remotecentral.com]

If it's worth $14.25 to you to get the codes, you can buy a second remote with a manual from this ebay listing...

[Link: cgi.ebay.com]

Alternatively, your remote looks somewhat similar to this one, so maybe these instructions will work for you...

[Link: jascoproducts.com]

thanks but can u help to program my tv with out the 3 digit code just by searching?
how can i search it by my self - i have an old sanyo tv and it works but the batt died and....

help
thanks

I don't have this remote myself (nor would I want one, to be honest) otherwise I would simply have quoted how to do it from the manual.

Therefore, the best I can do is show you where you can buy a manual (with a free remote) and give you an alternative manual to try.

The manual that I posted the link for is made by the same company, it looks somewhat similar and it has a SETUP button. However, I assume that you've already tried the search method as described on page 8 of that manual and I further assume that it didn't work, in which case I'm all out of guesses.

OK, just started, and have the codes. How do I post. Preferred to send as a jpeg

With the help of the posts here, I was able to program a remote like the one pictured.
1) Press device key (TV, AUX, CAB or VCR)
2) Press and hold SET UP button (keep it pressed until you enter the code)
3) Enter 3 digit code (2 quick flashes of LED seems to mean a good code).
4) Release SET UP button.
The 3 digit codes can be found at:
[Link: hifi-remote.com]
(add 17 to the code numbers on the charts)
Thanks for the help, Jim

Found a PDF format manual for GEU401 at last....

[Link: download.ethomson.com]

yo guys i also have the CGU401 and lost the codes sheet...and i tried geu401's codes. my tv brand is hitachi...i have no idea what's wrong with it..

I just open up your post. It was just what I'm looking for. Thanks a great lot.

It was a great help. Thanks.