Your Universal Remote Control Center
RemoteCentral.com
General Consumer Remotes Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Haier TV, TN201AUV remote code? Ugh
This thread has 9 replies. Displaying all posts.
Post 1 made on Sunday August 7, 2005 at 23:33
beepersound
Lurking Member
Joined:
Posts:
August 2005
3
Hi I've borrowed a Haier TV, 20" TN201AUV and Cablevision tells me they don't have a code for it for their cable remote. Any help with this? I hope it's not a durabrand tv in disguise. thanks, Bob NYC
Post 2 made on Sunday August 7, 2005 at 23:39
edmund
Elite Member
Joined:
Posts:
April 2002
13,243
In fact the one-for-all urc-8820 lists two Haier tv codes, first one is also lsted under durabrand. :)
Post 3 made on Sunday November 27, 2005 at 15:00
bfgilguerr
Lurking Member
Joined:
Posts:
November 2005
3
Hello Edmund,

Nice to meet you... Listen, I have a similar problem. I currenty purchased a Haier TV, 20" TN201AUV, from a pawn shop but it did not include the remote control. They provided me with an RCA Universal control, but that did not work.

I've found a Comcast M1057, which worked beautifully but the small problem is that the MENU Feature is preset to the factory setting for the CABLE Box and I cannot removed the rating settings that the TV currently has.

This is causing me some problems, since I cannot watch certain programs (TBS, Etc.) due to the Rating Setting Block it has. Please HELP me out with this issue

Thank You in advance for your time and assistance in this utmost important matter. Thanks Boris.
Post 4 made on Sunday November 27, 2005 at 15:02
bfgilguerr
Lurking Member
Joined:
Posts:
November 2005
3
PS - -> My e-mail address is as follows - bfgilguerrero@yahoo.com

Thanks again Boris.
Post 5 made on Sunday November 27, 2005 at 15:20
edmund
Elite Member
Joined:
Posts:
April 2002
13,243
Is the code in comcast remote that worked, 1034 or 0768? And which of two, if worked, did work?
Post 6 made on Tuesday November 29, 2005 at 20:45
bfgilguerr
Lurking Member
Joined:
Posts:
November 2005
3
No... The code that I'm using is "0748", but I will try the codes you provided - 1034 or 0768 and see what happens... But like I stated before, my problem is that I cannot use the MENU feature, which I'll need to get at, in order to switch the V-Chip parental control settings... Please look into this matter for me... Thanks, Boris...
Post 7 made on Friday December 12, 2008 at 00:17
David1081
Lurking Member
Joined:
Posts:
December 2008
2
On November 27, 2005 at 15:00, bfgilguerr said...
Hello Edmund,

Nice to meet you... Listen, I have a similar
problem. I currenty purchased a Haier TV, 20" TN201AUV,
from a pawn shop but it did not include the remote control.
They provided me with an RCA Universal control, but that
did not work.

I've found a Comcast M1057, which worked beautifully
but the small problem is that the MENU Feature is preset
to the factory setting for the CABLE Box and I cannot
removed the rating settings that the TV currently has.

This is causing me some problems, since I cannot
watch certain programs (TBS, Etc.) due to the Rating Setting
Block it has. Please HELP me out with this issue

Thank You in advance for your time and assistance
in this utmost important matter. Thanks Boris.
Post 8 made on Friday December 12, 2008 at 00:19
David1081
Lurking Member
Joined:
Posts:
December 2008
2
On November 27, 2005 at 15:00, bfgilguerr said...
Hello Edmund,

Nice to meet you... Listen, I have a similar
problem. I currenty purchased a Haier TV, 20" TN201AUV,
from a pawn shop but it did not include the remote control.
They provided me with an RCA Universal control, but that
did not work.

I've found a Comcast M1057, which worked beautifully
but the small problem is that the MENU Feature is preset
to the factory setting for the CABLE Box and I cannot
removed the rating settings that the TV currently has.

I inherited a Haier TN201AUV (20") without the remote. Very little info on the web and I had a hard time finding a universal that would work for a Haier without paying $30 for an exact replacement from the web sharks. I found the GE 3 in 1 Model #RM24912 at Walmart for about $7 that works perfectly. The booklet lists 5 codes for Haier, and code 0217 works all the functions on my tv, including mute, channel return, and even the menu for color adjustment, sleep timer etc. I'm very pleased with it.
Post 9 made on Wednesday July 22, 2009 at 23:45
Sara1234
Lurking Member
Joined:
Posts:
July 2009
1
I encontered the same problem with my old 13" Haier tv i bought back in 2001. I bought a Radio Shack Family Favorite 5-in-1 remote for $14.99 since it was the only one that listed Haier. That code was 1034. Try that.

That didnt work for me unfortunately, so I referred to a combination of the troubleshooting of the 2 previous models (4-in1 and 3-in-1).

1. Press "TV" button
2. Hold "P" (program button) till the "TV" button flashes once then twice
3. Enter 9 9 1, and the "TV" should flash twice
4. Aim the remote at the TV and hold the Power button down for at least 3 seconds. (Remote automatically goes to first code but it probably wont work so go on to step 5)
5. Press CH+ repeatedly till the TV shuts off and stop immediately!
6. Hold "P" for 2 seconds
7. Hold "Select" for 2 seconds
8. Hold "P" for 2 seconds
9. Hold Power for 2 seconds and TV should turn back on.

If not. Repeat steps 1 thru 9. I know it sounds tedious but its the best bet. It took me three tries because my finger slipped and hit other buttons or I didnt stop when it shut off. I spent 3 hours looking for codes online and nothing worked.

Replacement on the Haier website is $19.99 plus a load in shipping. This beats that!

Good Luck!
Post 10 made on Wednesday May 8, 2013 at 17:12
tellinU
Junior Member
Joined:
Posts:
May 2013
1
I have a Haier TN201AUV television and I finally got the Charter remote to work with the volume control on the new remote. I went to Charter Cable remote control page: select cable box; Pace, select TV; Haier.
I got several codes, but the code:
Pace Code 01877 worked.
Hope this saves you some time, I spent half a day trying different codes.
Good look, hang in there.
PS Charter tech told me to take the new remote back and get a new one.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse