Your Universal Remote Control Center
General Consumer Remotes Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from


GE DVD Remote Codes
This thread has 3 replies. Displaying all posts.
Post 1 made on Thursday September 23, 2004 at 22:44
Lurking Member
September 2004
DVD Model #GE1105P Remote Model Number# 244156

I need to know how to program this remote and I need the codes for my Sanyo TV. Thanks!

Remote: [Link:]
Post 2 made on Friday September 24, 2004 at 00:05
Elite Member
April 2002
Just press and hold the TV key while you enter these codes: 1004, 1048, 1049, 1050, 1080, 1107, 1108, 1162, 1180, 1189
Post 3 made on Wednesday May 25, 2005 at 00:21
Lurking Member
May 2005
I was wondering if you could give me the codes for a Daewoo TV. It would be a huge help, thank you in advance.

On 09/24/04 00:05 ET, edmund said...
Just press and hold the TV key while you enter
these codes: 1004, 1048, 1049, 1050, 1080, 1107,
1108, 1162, 1180, 1189
Post 4 made on Saturday September 9, 2006 at 20:28
Lurking Member
September 2006
I've been searching fruitlessly for the codes for my CRK76DC1 remote on my General Electric DVD Player, model GE1105P. I haven't found any manuals or codes. Shame on this web page especially, for not having information on a common player sold at Wal-Mart. Granted, it's a garbage unit, but I have a special treat for you looking for answers on this remote. Sadly, I figured it out in less than 5 minutes on my own with a little logic- sometimes if you want something done you really do have to do it yourself. Here is the solution:

First, power on your television that you wish to program.

Then, hold down the TV and Power ON/OFF buttons at the same time for a few seconds until the red LED light goes solid. Release.

Now, cycle the Power ON/OFF button while pointing at your television. Each time you depress this button the LED flash off before returning solid. If your television is compatible the TV will eventually turn off. The remote has found the correct code.

Set the program by pressing and holding the STOP button at the bottom of the remote until the LED turns off.

That's it! I hope this works for you.



Jump to

Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse