| Post 1 made on Wednesday August 27, 2003 at 20:17 |
MisterEd Lurking Member |
Joined:
Posts: | August 2003
6 |
|
|
I have a URC6131 (that's the one with the TiVo "thumbs" design). I have a STANDALONE Series 1 TiVo and a series 1 DirecTiVo.
This is not a problem using the TiVo remotes because you can set them two separate "addresses?" so each one only controls 1 TiVo however my 6131 seems to be able to have only 1 address and therefor it controls BOTH TiVos at the same time.
Is there a way to set the 6131 to only control 1 TiVo? (does it support alternate addresses and if so, how).
Thanks
|
|
| Post 2 made on Wednesday August 27, 2003 at 20:40 |
edmund Elite Member |
Joined:
Posts: | April 2002
13,841 |
|
|
Nope, the only philips/hughes tivo code you'll find in ANY universal remote is the default code. Which will control any tivo no matter what address its set for. Replace one the tivos with a Sony, you'll have it made.
|
|
| Post 3 made on Wednesday August 27, 2003 at 21:38 |
jamesgammel Founding Member |
Joined:
Posts: | March 2002
1,152 |
|
|
there is a way to set the 6131 to control both tivos each on a different address. However, it involves JP-1, and actually a little more (parts need to be added in).
Jim
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
