Your Universal Remote Control Center
RemoteCentral.com
General Consumer Remotes Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
does anyone know how to do a auto-search on a jensen jr400 remote
This thread has 11 replies. Displaying all posts.
Post 1 made on Sunday August 10, 2003 at 23:13
jenni16_2002
Lurking Member
Joined:
Posts:
August 2003
6
ilost the manual and the web sit is down
Post 2 made on Sunday August 10, 2003 at 23:16
Anthony
Ultimate Member
Joined:
Posts:
May 2001
27,275
I think we got it the first two times you posted.
...
OP | Post 3 made on Sunday August 10, 2003 at 23:18
jenni16_2002
Lurking Member
Joined:
Posts:
August 2003
6
well if someone would help me i wouldnt have to keep posting
Post 4 made on Sunday August 10, 2003 at 23:24
Anthony
Ultimate Member
Joined:
Posts:
May 2001
27,275
1) have you looked at what I posted in one of your other threads?

2) have you thought that maybe no one has been on this board that knows the answer since you posted your first question?

3) If no one answered your first post (and it is still at the top of the forum) what makes you think that any one will answer your other posts. Actually it will probably backfire since it has more chances of annoying any regulars.
...
OP | Post 5 made on Sunday August 10, 2003 at 23:30
jenni16_2002
Lurking Member
Joined:
Posts:
August 2003
6
yes i did it had nothing to do with what i am looking for this is my first time on this site forgive me for any annoyance i have caused
Post 6 made on Sunday August 10, 2003 at 23:42
Anthony
Ultimate Member
Joined:
Posts:
May 2001
27,275
did not annoy me much, but it is just rude.

I don't know about Jensen, but a lot of times the different remotes from a manufacturer use the same setup and the same codes

did you try

Auto Code Scan:

The Auto Code Scan feature allows you to set up your components without having to enter in code numbers. The Jensen will do the work for you! (It may take a few minutes to find your code using this method.)

1) Turn on the component that you want to set up.

2) Hold the component key down until the light comes on. The green light should come on after approximately 3 seconds.

3) Release the component key.

4) If you are programming the DVD or CD device press the "action" key. The red indicator light will come on.

5) Press "0" - "9" The green light will blink as codes are sent.

6) As soon as the remote turns your component off, press the "action" key. (You have 1 second in which to press the "action" key to save the code.) The component key lights will blink with an upward motion when a code has been successfully entered. The component is now programmed. To find that code, proceed to Code Readback.

7) If none of the codes turn your component off, return to step 2 and start over.

...
Post 7 made on Thursday November 27, 2003 at 02:13
bear301
Lurking Member
Joined:
Posts:
November 2003
1
To Program your device, (1)press down and release the device mode key (tv,vcr,etc.) (2)pressdown and hold the setup key until the led blinks twice, then release.
(3)Enter the codes 9,9,0, the led will blink twice.
(4)press numbers 1,2,3,4 observing the number of blinks after each number entered. write down the number of blink codes for each number entered, and store for future use.
I finally found the manual to my jensen remote so i'm quoting directly. have fun surfing :-) if you would like the codes to a particular device e-mail me and i'll look in the manual and get back to you.
Post 8 made on Sunday February 1, 2004 at 18:42
kfrey
Lurking Member
Joined:
Posts:
February 2004
1
I really need to know how to use the auto-scan feature of the Jensen JR500C universal remote. Its probably the same as the JR300. If you could help I would be very greatful.

Thanks
Post 9 made on Sunday February 15, 2004 at 12:50
dave beichley
Lurking Member
Joined:
Posts:
February 2004
4
did u ever get the codes for the jr400 remote. the site is still down. appreciate a reply. thx u davebeichley7@netscape.net
Post 10 made on Sunday February 15, 2004 at 14:40
Ron Aronson
Super Member
Joined:
Posts:
June 2002
3,967
There is some info here, if you haven't seen it. Couldn't find your remote but something may help. Also look further down the listing at Recoton [Link: xdiv.com]
Post 11 made on Sunday February 15, 2004 at 18:16
dave beichley
Lurking Member
Joined:
Posts:
February 2004
4
thanks
Post 12 made on Monday July 10, 2006 at 11:50
opd_717
Lurking Member
Joined:
Posts:
July 2006
1
Hello. can anyone help me get the remote codes for Jensen JR400. I need sat: dish network and tv RCA. I also need the auto scan for the device. The post for the auto scan does not work for jr400... thanks in advance


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse