Post 1 made on Sunday February 5, 2006 at 10:31 |
Line Lurking Member |
Joined: Posts: | February 2006 3 |
|
|
At first. I know all the configuration I have to do in the Net. At last I have to activate the service on the RC9800i (Europa 2.0.80) .
The LED shows me, that the Connection to the wireless lan. With every computer in my network I can go to the internet.
When I click on the RC9800i to "Status prüfen" (status examine) then the message appear: "Verbindung zum Aktivierungsdienst nicht möglich". (Connection to the activation service not possible).
Is there a possibility, how I can test the connection to the RC9800i homepage? Have you an idea, what I do wrong?
Can someone help me. Dank you very much.
|
|
Post 2 made on Monday February 6, 2006 at 02:45 |
De Pampi Long Time Member |
Joined: Posts: | November 2005 95 |
|
|
You can try if the remote is reachable by pinging it:
in windows -> run -> cmd ping ip-adress (example ping 192.168.1.6)
The ip-adress of the remote can be found in the settings menu
Regards,
De Pampi
|
|
OP | Post 3 made on Monday February 6, 2006 at 14:58 |
Line Lurking Member |
Joined: Posts: | February 2006 3 |
|
|
Danks De Pampi there is no problem to ping the RC9800i. The mistake must by elsewhere.
|
|
Post 4 made on Wednesday April 5, 2006 at 12:12 |
Try shutting it off from the small witch back and then turning it back on (this easy idea came to me after the same problem and worked). Then connect again to your wifi in the settings. Also make sure that your wifi is on B and G dual mode.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.