|Post 1 made on Saturday December 3, 2005 at 19:54|
Has any one tried to configure the remote to work with the Roku Media Bridge? I know that they supply codes for the pronto... but was not sure how it would work with the 9800
|Post 2 made on Sunday December 11, 2005 at 03:31|
I think you probably mean the Roku Soundbridge ? I have the M1000. There is no IR codeset supplied that will work and the Autolearn did not work. I selected custom codeset and found that the RC9800i could be taught individual buttons. (Although I only tried the Power On/Off and Volume as that was all I need)
As for UpNp funtionality there is compatibility so long as you have at least Soundbridge 2.3.44 firmware.
Expect other soundbridges to be the same as they use the same firmware.
Hope this helps
|Post 3 made on Sunday January 22, 2006 at 19:51 |
I have set my RC9800i up to work with my Roku Photobridge (aka HD1500). I had to select a Runco Cable Box (so I got a different device icon) and then custom learn the most appropriate codes from the 'Try & Learn' list. Not ideal as it now shows up as a Runco HD1500 in the Individual Device list. Would be nice to be able to edit/rename the device manufacturer name.
Maybe this will come with a later firmware release along with button renaming, deletion etc. I live in hope :)
Please read the following:
Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace
. For information on how to advertise your service or product click here
. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.