10/10/25 - It’s been so long since we’ve last seen you!
|
|
 |
|
|
The following page was printed from RemoteCentral.com:
|
Toshiba HD-A1 On/Off Discretes Needed
| |
|
| Topic: | Toshiba HD-A1 On/Off Discretes Needed This thread has 10 replies. Displaying all posts. |
|
| Post 1 made on July 17, 2006 at 14:41 |
|
Joined: Posts: | December 2003 142 |
|
|
I've searched this Forum, but haven't been able to find a discrete on/off for this new Toshiba HD DVD player. Does anyone have them?
|
|
| Post 2 made on July 17, 2006 at 15:14 |
|
Joined: Posts: | August 2001 88 |
|
|
Here's mine. I generated these off of the discrete RS232/makehex/and the help of RC.com [Link: poweroftheforce.com] This is my whole PCF, but the HDA1 discretes are there. As a note, the discrete off does not work yet(IR and 232), but a bug report has been sent to Toshiba. Hopefully it will get fixed in the next firmware release. |
|
| OP | Post 3 made on July 17, 2006 at 16:39 |
|
Joined: Posts: | December 2003 142 |
|
|
On July 17, 2006 at 16:14, edlee said...
Here's mine. I generated these off of the discrete RS232/makehex/and the help of RC.com [Link: poweroftheforce.com] This is my whole PCF, but the HDA1 discretes are
there. As a note, the discrete off does not work
yet(IR and 232), but a bug report has been sent
to Toshiba. Hopefully it will get fixed in the
next firmware release. Excellent, thanks. |
|
| OP | Post 4 made on July 17, 2006 at 18:58 |
|
Joined: Posts: | December 2003 142 |
|
|
I used your file, but the Power On (146) code is not working. Does that work for your HD-A1?
|
|
| Post 5 made on July 17, 2006 at 19:05 |
|
Joined: Posts: | August 2001 88 |
|
|
Yes, the on code works perfectly with my HDA1. The power off doesn't however...
|
|
| OP | Post 6 made on July 17, 2006 at 19:21 |
|
Joined: Posts: | December 2003 142 |
|
|
On July 17, 2006 at 20:05, edlee said...
Yes, the on code works perfectly with my HDA1.
The power off doesn't however... Strange. Which button are you linking it to? I'm using the "Power On" code under "New Codes" and the HEX is 900A 006D 0000 0001 45B5 926D. Is this the code you're using? |
|
| Post 7 made on July 17, 2006 at 19:34 |
|
Joined: Posts: | August 2001 88 |
|
|
I need to go look as I'm not currently at my computer that has the file... :( However, if you look at the PCF I sent, you can see where it is linked to. If you're still having problems, I can forward on the original hex, as the 900A is a converted. I just tried my remote out with my power on button, and it turned on. Pressed again, and nothing...no play, no power off, etc. |
|
| OP | Post 8 made on July 17, 2006 at 19:46 |
|
Joined: Posts: | December 2003 142 |
|
|
I think I linked it to the right button, bu if you could email the HEX to me that would be great. My email is [email protected]. Alternatively, if you want to just post the HEX here, that would also be great. Thanks. BTW - For OFF, I just activated the "Standby" option on the player and it always shuts off after 20 minutes of non-usage. |
|
| Post 9 made on July 17, 2006 at 21:03 |
|
Joined: Posts: | August 2001 88 |
|
|
Here's the hex... Power ON 0000 006d 0022 0002 0157 00ac 0015 0041 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0016 0015 0689 0157 0056 0015 0e94 Power OFF 0000 006d 0022 0002 0157 00ac 0015 0041 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0016 0015 0689 0157 0056 0015 0e94 HTH,
Ed |
|
| Post 10 made on July 18, 2006 at 09:20 |
|
Joined: Posts: | November 2005 9 |
|
|
On July 17, 2006 at 20:46, RMSko said...
I think I linked it to the right button, bu if you could email the HEX to me that would be great. My email is [email protected]. Alternatively, if you want to just post the HEX here, that would also be great. Thanks. BTW - For OFF, I just activated the "Standby"
option on the player and it always shuts off after
20 minutes of non-usage. Couldn't you use the discrete POWER ON for on and then use the remote's POWER toggle for off as a workaround? |
|
| Post 11 made on July 18, 2006 at 09:29 |
|
Joined: Posts: | August 2001 88 |
|
|
On July 18, 2006 at 10:20, k4lk said...
Couldn't you use the discrete POWER ON for on
and then use the remote's POWER toggle for off
as a workaround? It's possible. However, when the system is already off, you need to put in a very large delay (like a minute) before the HDA1 will respond to the toggle. The HDA1 takes a while to boot completely before it will respond to another IR command. So, it would be: Power ON
Delay 60sec
Power Toggle It would be much easier when the system is already off (in my PCF, I don't turn everything on at once...I only have the components I am using turn on...if I decide to change source, that source will then turn on). |
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
