Your Universal Remote Control Center
RemoteCentral.com
Philips Pronto NG Family Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Pronto vs. Windows 10
This thread has 4 replies. Displaying all posts.
Post 1 made on Friday February 28, 2020 at 15:12
Wyant
New Member
Joined:
Posts:
February 2020
2
I have been running ProntoEditNG v2.1.8 in compatibility mode under 32-bit Windows 7 on my PC. I just upgraded to 32-bit Windows 10 and now ProntoProEditNG opens but wonít upload or download .ccf files because the driver seems to be missing and there doesnít seem to be a compatibility mode in Windows 10. I downloaded ProntoEditNG v3.4.16 hoping that would fix the problem and tried to use it to update the older version (v2.1.8), but when I tried to install it, it asked me to connect the Pronto to a USB port and then when I try to install it warns me that it will overlay my .ccf file. Iím reluctant to do this since the Pronto will then be inoperative if Iím not able to get ProntoProEditNG working. Is ProntoProEditNG supposed to work with Windows 10 and if so, how do I install the missing driver without wiping out the .ccf file on the pronto?
Wyant J. Wharton
Post 2 made on Sunday March 1, 2020 at 16:49
Lyndel McGee
RC Moderator
Joined:
Posts:
August 2001
12,390
If you have a TSU3X00, TSU7X00, or equivalent, this post really should be in the Next Generation Forum.

In the NG forum, I believe I have a detailed thread about the driver. I recently installed PPENG and I believe it had a folder under the location where it installed for drivers. Note that only the TSU7X00 remotes require a driver the TSU3X00 remotes used the HID drivers from Windows.

Here are a couple of links for the 7000 series driver.

[Link: remotecentral.com]

[Link: remotecentral.com]

If you'd like me to move the thread to that forum, please indicate such and I will move it.

With regard to your question about working with Windows 10, Philips has not touched this software since circa 2004. Some folks have gotten it to work with Windows 10. I personally still use Windows 7 32 bit for my Pronto work but suspect in the very, very near future, I will move to Windows 10. As I only have Pro Remotes remaining, I am very hopeful that I can continue my efforts on Windows 10.
Lyndel McGee
Philips Pronto Addict/Beta Tester
OP | Post 3 made on Monday March 2, 2020 at 15:58
Wyant
New Member
Joined:
Posts:
February 2020
2
Thanks Lyndel. I'll see what I can do with the info you provided. Yes, you can move the thread.
Wyant J. Wharton
Post 4 made on Wednesday March 11, 2020 at 23:23
Maddmaster
Long Time Member
Joined:
Posts:
April 2004
23
I have not been able to get any further than you either. I just pulled out an old PC with XP on it and setting back up. I saw a work around on youtube but didn't try it.
Post 5 made on Friday April 3, 2020 at 14:01
411avatar
Long Time Member
Joined:
Posts:
October 2003
149
For several years I have been successful running PENG or PPENG in a virtual XP machine under VMware Workstation.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse