Your Universal Remote Control Center
RemoteCentral.com
Philips Pronto NG Family Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Xfintiy finally put my tsu7000 into obsolete?
This thread has 2 replies. Displaying all posts.
Post 1 made on Sunday January 14, 2018 at 11:32
nyokie
Long Time Member
Joined:
Posts:
December 2003
20
Just got the new samsung x1 box with xr11 rf remote and of course i cant learn rf codes. I there a solution? I hate to give up my pronto, best remote ever made. Have bought a couple backup 7000s from ebay in case i broke one i love them so much. No one has built a fully customizable remote like it since that i know of. Help please haha
Post 2 made on Tuesday January 16, 2018 at 13:38
JurgenW
Long Time Member
Joined:
Posts:
November 2005
53
I don't know about it. But this is from page 50 from the 7500 manual:
Selecting RF to Operate your Devices
1 Tap and hold the ProntoPro NG icon in the upper left corner of the touch screen for 3 seconds. The Tools Menu appears.
2 Tap in the Tools Menu.
The ‘RF IR Tool’ screen appears.
3Tap .
The Device Overview appears.
4 Tap the Device for which you want to select RF.
The ‘Select IR or RF’ screen appears. By default IR is selected in the Sending Signals list.
The Define RF button is disabled.
5 Choose RF in the Sending Signals list. The Define RF button is enabled.
6Tap .
The ‘RF Settings’ screen appears.
7 Select the RF Channel in the RF Channel list you use for the
RF Extender.
The RF Channel on the RF Extender has to be the same as the RF Channel on ProntoPro NG.
8 Select the Extender ID in the Extender ID list you use for the
RF Extender.
The Extender ID on the RF Extender has to be the same as the Extender ID on ProntoPro NG.
Note
9 Tap
You can use several RF Extenders with your ProntoPro NG. For each RF Extender you use for your devices, you need to set the RF Channel and the Extender ID.
The RF Channel is identical for all RF Extenders. The Extender ID is unique for each RF Extender.
in the ‘RF Settings’ screen.
The RF settings are saved.
10 Tap inthe‘SelectIRorRF’screen.
ProntoPro NG will send out RF signals for the selected device.
Note Try to keep ProntoPro NG and the RF Extender away from metal objects, as this will have a negative impact on the range.
Best regards, Jürgen
Post 3 made on Thursday January 18, 2018 at 13:50
DSTdrummer
Lurking Member
Joined:
Posts:
December 2017
1
I don't know about Xfinity, but my DirecTV remote can be switched in to IR mode in the remote setup menu on the box. Then I can learn my IR codes to the TSU7000 at will.

Hope this helps.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse