Your Universal Remote Control Center
RemoteCentral.com
Philips Pronto NG Family Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Yamaha RX-v575 codes
This thread has 4 replies. Displaying all posts.
Post 1 made on Monday October 14, 2013 at 22:51
Pronto Guy
Long Time Member
Joined:
Posts:
December 2003
91
Hi,
I just got the Yamaha RX-v575 receiver and I am looking for all the codes. Does anyone have the codes for this receiver? I still have my TSU 7000/37 and I still love it and want to use it.
Post 2 made on Friday October 18, 2013 at 17:16
Lyndel McGee
RC Moderator
Joined:
Posts:
August 2001
12,423
Yamaha receivers pretty much use all the same NEC codeset. You can download a CCF for the RX-V800/900 or the 1000 from the classic pronto files section. There is one out there that has extended codes. Note that you might not have all the new sound modes covered but this will give you a good starting point.

Just remember you have to do: File->Import CCF...
Lyndel McGee
Philips Pronto Addict/Beta Tester
Post 3 made on Friday October 18, 2013 at 23:53
3FG
Select Member
Joined:
Posts:
August 2009
1,859
Here's the complete set of IR codes for the 575.  These need to be converted to Pronto Hex.  Take the IR code listed in the Yamaha PDF files, and substitute a space for the hyphen, and enter that into the Yamaha Pront Hex converter.

For example HDMI1 (main zone) is shown as 7A-4738.  Enter 7A 4738 into the converter.  If you don't include the space or put it in the wrong position, the converted Pronto Hex will be incorrect.
OP | Post 4 made on Saturday October 19, 2013 at 00:57
Pronto Guy
Long Time Member
Joined:
Posts:
December 2003
91
Thank you 3FG,
I've done this before but it's been a long time. My next big thing is to figure out how to get a working Windows XP to install Pronto Edit to. I have Virtualbox and Windows XP installed but I can't get it to recognize the Pronto.
Post 5 made on Sunday December 1, 2013 at 17:47
jasonrusso
Long Time Member
Joined:
Posts:
November 2013
23
Do I need to enter the ID1 or ID 2 code into the converter? Both? I am in the same boat as the thread starter. I have a pronto that controls everything except my new Yamaha.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse