Your Universal Remote Control Center
RemoteCentral.com
Philips Pronto NG Family Forum - View Post
Previous section Next section Previous page Next page Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Page 2 of 2
Topic:
TSU7500, RU990, TSU7000 charging issue
This thread has 20 replies. Displaying posts 16 through 21.
Post 16 made on Sunday February 3, 2013 at 07:35
barend
Long Time Member
Joined:
Posts:
October 2003
275
Well I bought a TSU7700-433.92MHz from France, the box arrived yesterday evening.
I found "somewhere" on the web a file called conrad.txt.
It has hundreds of on/off/toggle hex codes, with model numbers, but none as the remote below.
All models list at least 6 buttons- my Elro has only four...
I've got some Exclusive-Home/Intertechno power sockets, they do work but they have to sit at least 1M apart, so I'm hoping to find codes for the Elro's.
Crossing my fingers they don't have to be so far apart!

This is the Elro I've got a set of three of:
[Link: amazon.de]
Model number is Elro AB440S/3C, the remote has 4 buttons, it's older than the ones you see in hardware stores: it has a little flap you can slide away to good old DIP switches (and an awkward 12V battery...).
It has cost me 9,90 Euro's at a pharmacist/drugstore (!).
Same units as above Amazon one.
Hope some codes will work for me!
If so, I'll upload the file here, in the files section, after I found out where I found it and made sure there are no impending rights...
Post 17 made on Sunday February 3, 2013 at 07:38
barend
Long Time Member
Joined:
Posts:
October 2003
275
If the charge "won't hold" check if the supply connector hasn't come loose from the circuit board.
Mine did, it broke off- still hoping I can resolder it "some day".
Incidentally I found a TSU or SBC on Ebay.co.uk recently with just Won't Hold symptom, no reply when I asked whether the connector was still firmly soldered on...
Post 18 made on Tuesday March 19, 2019 at 15:23
ingvar13
Lurking Member
Joined:
Posts:
January 2019
5
I got same problem with my TSU7500 - led lights is OK, looks like it charges when on docking station but no holding power. Is it connector problem? I had this problem second time, 7 years ago same was with RU990 and I just bought TSU7500 on Ebay.
Post 19 made on Tuesday March 19, 2019 at 18:04
Lyndel McGee
RC Moderator
Joined:
Posts:
August 2001
12,985
Now, when on the docking station, the battery icon on screen will cycle but that does not mean that battery is charging, just that remote sees external power.

Charging but holding no power could be a bad battery as well.
Lyndel McGee
Philips Pronto Addict/Beta Tester
Post 20 made on Thursday March 21, 2019 at 16:57
ingvar13
Lurking Member
Joined:
Posts:
January 2019
5
No this is not battery problem. the bettery is new now (and in last case 8 years ago with ru990 I tried 2 new batteries but only when I change docking station it was fixed).
Post 21 made on Saturday March 23, 2019 at 10:30
Lyndel McGee
RC Moderator
Joined:
Posts:
August 2001
12,985
Gotcha. Thanks for the follow-up.

Lyndel
Lyndel McGee
Philips Pronto Addict/Beta Tester
Page 2 of 2


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse