Your Universal Remote Control Center
RemoteCentral.com
Philips Pronto NG Family Forum - View Post
Previous section Next section Previous page Next page Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Page 1 of 3
Topic:
Discrete on/off codes for Cambridge Audio 640R and DVD players
This thread has 34 replies. Displaying posts 1 through 15.
Post 1 made on Thursday September 17, 2009 at 19:19
Kefci2000
Lurking Member
Joined:
Posts:
June 2009
9
Hi,

Thinking of purchasing new 650R and BD player when they are out, but thought I would check in advance if I anyone had discrete on/off codes for the prior models?

Thanks
OP | Post 2 made on Thursday September 17, 2009 at 19:36
Kefci2000
Lurking Member
Joined:
Posts:
June 2009
9
Not to worry....found it myself

The latest Azur unit remotes utilise discrete on/off commands for multi room and custom install use. This means that the commands for on and off are on different frequencies, and will need to be learnt to seperate buttons on a learning remote control. To do this, press and hold down the power button on the remote control. After 12 seconds it will send the on command, and after another 12 seconds, it will send the off command.
When sending a signal from the remote directly to the device, this button will function as normal, and only needs to be pressed once to turn the unit either on or off.
Post 3 made on Thursday September 17, 2009 at 23:35
Jasonvp
Select Member
Joined:
Posts:
July 2008
2,404
For anyone else looking for Cambridge Audio IR Codes. Most can be found on their Support Site.

Just select your Product.

[Link: cambridgeaudio.com]

Cheers
Jason
Post 4 made on Tuesday December 8, 2009 at 07:20
Vesa Mäkelä
Founding Member
Joined:
Posts:
December 2001
21
No codes for Cambridge Audio Azur 650BD Blu-ray player at the moment. It's remote has some dual function buttons that are difficult to learn (I have ProntoPro TSU990). I have managed to teach the remote only one of the functions mostly and for one button none.

In Azur's remote you push the button shortly (function 1) or push and hold for more than approx. 1 second (function 2).

For example:

Angle/Zoom button:

Angle (=function1)
0000 0074 003D 0003 0141 009F 0015 003B 0015 0015 0015 0015 0015 003B 0015 0015 0015 0015 0015 003B 0015 0015 0015 0015 0015 003B 0015 003B 0015 0015 0015 003B 0015 003B 0015 0015 0015 003B 0015 003B 0015 003B 0015 0015 0015 003B 0015 0015 0015 0015 0015 003B 0015 0015 0015 0015 0015 0015 0015 003B 0015 0015 0015 003B 0015 003B 0015 0015 0015 003B 0015 2283 0141 009F 0015 003B 0015 0015 0015 0015 0015 003B 0015 0015 0015 0015 0015 003B 0015 0015 0015 0015 0015 003B 0015 003B 0015 0015 0015 003B 0015 003B 0015 0015 0015 003B 0015 003B 0015 003B 0015 0015 0015 003B 0015 0015 0015 0015 0015 003B 0015 0015 0015 0015 0015 0015 0015 003B 0015 0015 0015 003C

Zoom (function 2, push and hold)
0000 0074 0022 0000 0141 009F 0015 003B 0015 0015 0015 0015 0015 003B 0015 0015 0015 0015 0015 003B 0015 0015 0015 0015 0015 003B 0015 003B 0015 0015 0015 003B 0015 003B 0015 0015 0015 003B 0015 003B 0015 003B 0015 0015 0015 0015 0015 0015 0015 0015 0015 003B 0015 0015 0015 0015 0015 0015 0015 003B 0015 003B 0015 003B 0015 003B 0015 0015 0015 003B 0015 009F

Those two functions work but only if I teach them into two separate buttons in Pronto.

Can anybody help. Jasonvp?

Last edited by Vesa Mäkelä on December 11, 2009 09:26.
Post 5 made on Tuesday December 8, 2009 at 09:16
Jasonvp
Select Member
Joined:
Posts:
July 2008
2,404
So do you want a Button that will Toggle between each?

Here are Clean Hex Codes for the Functions,

ANGLE
0000 006D 0022 0002 0157 00AC 0015 0041 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0041 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0689 0157 0056 0015 0E94

ZOOM
0000 006D 0022 0002 0157 00AC 0015 0041 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0041 0015 0016 0015 0041 0015 0689 0157 0056 0015 0E94

If they don`t work try these,

ANGLE
0000 0073 0022 0002 0145 00A3 0014 003D 0014 0015 0014 0015 0014 003D 0014 0015 0014 0015 0014 003D 0014 0015 0014 0015 0014 003D 0014 003D 0014 0015 0014 003D 0014 003D 0014 0015 0014 003D 0014 003D 0014 003D 0014 0015 0014 003D 0014 0015 0014 0015 0014 003D 0014 0015 0014 0015 0014 0015 0014 003D 0014 0015 0014 003D 0014 003D 0014 0015 0014 003D 0014 0632 0145 0052 0014 0DD2

ZOOM
0000 0073 0022 0002 0145 00A3 0014 003D 0014 0015 0014 0015 0014 003D 0014 0015 0014 0015 0014 003D 0014 0015 0014 0015 0014 003D 0014 003D 0014 0015 0014 003D 0014 003D 0014 0015 0014 003D 0014 003D 0014 003D 0014 0015 0014 0015 0014 0015 0014 0015 0014 003D 0014 0015 0014 0015 0014 0015 0014 003D 0014 003D 0014 003D 0014 003D 0014 0015 0014 003D 0014 0632 0145 0052 0014 0DD2

Is this what you want?

Cheers
Jason

Last edited by Jasonvp on December 8, 2009 09:33.
Post 6 made on Friday December 11, 2009 at 09:25
Vesa Mäkelä
Founding Member
Joined:
Posts:
December 2001
21
Thanks but those codes work. But this code does nothing although it should do

Subtitle (=push and hold with the original remote)
0000 0074 001B 0002 0141 009F 0015 003B 0015 0015 0015 0015 0015 003B 0015 0015 0015 0015 0015 003B 0015 0015 0015 0015 0015 003B 0015 003B 0015 0015 0015 003B 0015 003B 0015 0015 0015 003B 0015 003B 0015 003B 0015 003B 0015 0015 0015 003B 0015 0015 0015 003B 0015 0015 0015 0015 0015 0015 0015 0015 0015 003C
Post 7 made on Friday December 11, 2009 at 16:51
Jasonvp
Select Member
Joined:
Posts:
July 2008
2,404
Try these,

SUBTITLE (38 KHz)
Device Code: 73 Function: 43
0000 006D 0022 0002 0157 00AC 0015 0041 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0041 0015 0689 0157 0056 0015 0E94

SUBTITLE (36 KHz)
Device Code: 73 Function: 43
0000 0073 0022 0002 0145 00A3 0014 003D 0014 0015 0014 0015 0014 003D 0014 0015 0014 0015 0014 003D 0014 0015 0014 0015 0014 003D 0014 003D 0014 0015 0014 003D 0014 003D 0014 0015 0014 003D 0014 003D 0014 003D 0014 0015 0014 003D 0014 0015 0014 003D 0014 0015 0014 0015 0014 0015 0014 0015 0014 003D 0014 0015 0014 003D 0014 0015 0014 003D 0014 003D 0014 0632 0145 0052 0014 0DD2
Post 8 made on Sunday December 13, 2009 at 14:58
Vesa Mäkelä
Founding Member
Joined:
Posts:
December 2001
21
Sorry but those codes do not function. Codes that start 0000 0074 ... are functioning.
Post 9 made on Sunday December 13, 2009 at 20:20
Jasonvp
Select Member
Joined:
Posts:
July 2008
2,404
The Codes in Post 7 were a guess from the Code in your Post 6. I could not get a correct read from it.

Have you tried the Codes from Post 5?

If any of those from Post 5 work, I can send you a PCF File with all 256 Hex Codes for you to try.

What Pronto Model do you have?


Cheers
Jason
Post 10 made on Sunday December 13, 2009 at 21:56
Lyndel McGee
RC Moderator
Joined:
Posts:
August 2001
12,552
On December 13, 2009 at 20:20, Jasonvp said...
What Pronto Model do you have?

Cheers
Jason

From a post #4 above, the TSU990 (which is actually RU990 - UK model).

Note that poster is not original author, but someone else asking questions about remote. I just noticed that as well.
Lyndel McGee
Philips Pronto Addict/Beta Tester
Post 11 made on Tuesday December 15, 2009 at 11:52
Vesa Mäkelä
Founding Member
Joined:
Posts:
December 2001
21
I got information from Cambridge Audio support that remote codes for 650BD are now on their Support Site. NEC code is 49 B6.
[Link: cambridgeaudio.com]

Problem is that I can't figure out how to make hex codes out of them.

Last edited by Vesa Mäkelä on December 15, 2009 12:15.
Post 12 made on Tuesday December 15, 2009 at 20:40
Jasonvp
Select Member
Joined:
Posts:
July 2008
2,404
You can just use this,
www.monmailbox.com/~raph//irhex_converter.html

E.G.
NEC CODE: 49 B6
STANDBY 04

You enter 49B6 04 or 49 04 (both will give you the same Hex Code) and press Generate.

0000 006D 0022 0002 0155 00AA 0015 0040 0015 0015 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040 0015 05ED 0155 0055 0015 0E47

This will generate the codes at 38KHz which is generally the Frequency for NEC Protocol but yours are learning at 36KHz and seeing that you have not answered my questions from previous Posts I can`t tell you if they will work!

Cheers
Jason
Post 13 made on Wednesday December 16, 2009 at 09:52
Vesa Mäkelä
Founding Member
Joined:
Posts:
December 2001
21
Thanks a lot. I will try that. I have only 3 functions that don't work. I will try to generate them.

I did it. The codes function perfectly now. I generated all the commands because they are short and clean. Everything works now perfectly.

Thanks a lot Jasonvp !

Last edited by Vesa Mäkelä on December 16, 2009 10:59.
OP | Post 14 made on Wednesday March 17, 2010 at 08:36
Kefci2000
Lurking Member
Joined:
Posts:
June 2009
9
Jason,

Do you have the full "ON" and "OFF" codes for the 650R and 650 BD?

I have done the hold for 12 seconds thing with the on/off buttons and can get "on" to work on BD650 (but not off) and only get "on" to work on 650R

Thanks in advance
Post 15 made on Wednesday March 17, 2010 at 09:56
Jasonvp
Select Member
Joined:
Posts:
July 2008
2,404
Azur 650R IR Remote Control Codes
These are RC5 Codes. You can enter them directly into Pronto or Matantz Software in the Button Properties - IR Code - Custom IR Code - RC 5/6/MM - RC5.

e.g. POWER_ON 100
System = 16
Command = 100

Azur 650BD IR Remote Control Codes

See Post 12 on how to generate the Hex Codes for the 650BD



Cheers
Jason
Page 1 of 3


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse