|Post 46 made on Monday February 15, 2010 at 19:55|
Just wanted to add my thanks to Greg (Dallas) for his superb pictorial instructions - they are perfect and I have successfully replaced the digitser on both a 980 and 990 unit....(must try to be more careful in future !)
Unfortunately I didn't find his instructions before I did mine so I cracked a screen due to not trimming the lugs first.....a costly mistake but still way cheaper than sending it off and paying someone else to do it.
The only additions I would add is to ensure there is no dust between the screen and digitiser as it would be very annoying and also to cover the old screen with a layer of sticky tape before cutting it off...it WILL crack and it WILL splinter....but the tape will hold it all together.
|Post 47 made on Sunday January 9, 2011 at 06:11|
The top screen on my beloved TSU7000 has recently cracked (the LCD is fine) and after reading through this thread I have been on the lookout for an iPAQ5400 screen. The ones I have found say they fit all the 5xxx series, now reading some of the posts here some say the 5500 screen is inverted. How do I know if the screens for sale are right in that case?
Should I just try and buy a 5400 and take out the screen?
Also is the 5450 the same screen as the 5400?
|Post 48 made on Tuesday August 6, 2013 at 20:09 |
Resurrecting this thread to see if anyone has the fix for the inverted digitizer. I just replaced the digitizer on my TSU-7000 and it's inverted. Any help would be greatly appreciated.
Please read the following:
Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace
. For information on how to advertise your service or product click here
. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.