Post 1 made on Wednesday March 28, 2007 at 03:52 |
ON/OFF
0000 0071 0001 0021 0080 0080 0020 0060 0020 0020 0020 0020 0020 0020 0020 0060 0020 0020 0020 0020 0020 0060 0020 0060 0020 0020 0020 0020 0020 0020 0020 0060 0020 0020 0020 0020 0020 0060 0020 0060 0020 0060 0020 0020 0020 0020 0020 0060 0020 0060 0020 0020 0020 0020 0020 0060 0020 0060 0020 0020 0020 0020 0020 0060 0020 0060 0020 0020 0020 0020 0080 007C
TEMP DOWN
0000 0071 0005 0021 000E 0060 0020 0060 0020 0020 0020 0020 0080 0080 0020 0060 0020 0020 0020 0060 0020 0020 0020 0060 0020 0020 0020 0020 0020 0060 0020 0060 0020 0020 0020 0060 0020 0020 0020 0060 0020 0020 0020 0020 0020 0060 0020 0060 0020 0060 0020 0020 0020 0020 0020 0060 0020 0060 0020 0020 0020 0020 0020 0060 0020 0060 0020 0020 0020 0020 0020 0060 0020 0060 0020 0020 0020 0020 0080 007C
I have used mod IRTOOL, but I don't know the protocol. IRTOOL only show me
DEVICE:KENWOOD/YAMAHA and CARRIE FREQUENCY 36,683KHZ.
|
|
Post 2 made on Wednesday March 28, 2007 at 09:08 |
johnsfine IR Expert |
Joined: Posts: | September 2002 5,159 |
|
|
Do those learned signals work? They don't look like good learns, so I wouldn't expect them to work.
Most IR controlled A/C systems use signals that are too long for a Pronto to learn. But I would expect slightly better results than those.
The second learn looks like the original remote started to send before the Pronto started to learn, so the beginning is missing. That should be easy to fix when relearning. The first one looks like the Pronto saw a repeat pattern that wasn't really there and that made it learn incorrectly. That's much harder to deal with. Probably you would need information from learns of other functions to deduce what On/Off should have looked like.
How many functions does the original remote have? With problem signals, it helps to examine a bunch of different functions.
Does the original remote remember the device state? In many A/C systems, the remote remembers the state and sends full state information for each command. So there wouldn't really be an IR signal for TEMP DOWN. Instead, the remote would remember the previous temperature. The TEMP DOWN button would lower the remembered termperature inside the remote, then send a disrete temperature command for the new temperature.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.