| Post 1 made on Wednesday February 28, 2007 at 19:01 |
Hitting an issue -- have programmed the rocker buttons on the bottom of the unit for each device but when config is downloaded, the rocker just seems to ignore the programmed codes and instead just scrolls between devices and screens within devices. Any ideas?
|
|
| Post 2 made on Wednesday February 28, 2007 at 19:18 |
Lyndel McGee RC Moderator |
Joined:
Posts: | August 2001
12,994 |
|
|
On the remote, go into setup (hold remote icon for 2-3 seconds) and turn off Cursor Navigation. You will need to do this each time you download firmware. FYI, the "rocker" you mention is the 4-way cursor pad.
|
Lyndel McGee
Philips Pronto Addict/Beta Tester
|
|
| Post 3 made on Wednesday February 28, 2007 at 21:14 |
Peter Dewildt Loyal Member |
Joined:
Posts: | July 2001
6,307 |
|
|
Lyndel, I have never had to change the setting apart from the very first time.
|
Peter
Pronto 1000 (retired), Pronto TSU7000, RFX6000 (retired)
Pronto 2xTSU9600, RFX9400 |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
