Post 1 made on Tuesday February 27, 2007 at 01:59 |
Hi All,
I'm having problems with my new pronto. I have everything worked and ready to go except for the commands with my onkyo 674. I'm entering the discrete codes for on/off that i have, and whenever i hit go back to check the commands, it always changes the hex code that i entered - i know that the pronto will edit the code down to make it cleaner - but it's not working.
Anybody know what's going on? Or can point me in the right direction.
Please help! Thanks
|
|
Post 2 made on Tuesday February 27, 2007 at 09:32 |
Lowpro Select Member |
Joined: Posts: | March 2004 2,081 |
|
|
The original remote for your Onkyo receiver should have both an "On" button and a "Standby" button. Those are your discrete power commands right there, so try learning them directly to the remote or to the editor rather than using the hex codes you've already got. If you have no luck there I'd suggest trying the discrete power codes for other Onkyo receivers as many will be the same. I've successfully learned the commands for various Onkyo receivers myself from the original remotes with no problems. In each case the original remotes had an "On" function which would only power on the unit, and a "Standby" function which would only power down the unit.
|
LP Related Links: View my profile to access various links to key posts and downloads. |
|
OP | Post 3 made on Wednesday February 28, 2007 at 08:50 |
My original remote only has a toggle for On/Standby.
I already tried to learn the IR command and even that didn't want to work.
|
|
Post 4 made on Thursday March 1, 2007 at 14:51 |
Lowpro Select Member |
Joined: Posts: | March 2004 2,081 |
|
|
Sorry to hear that. Have you tried discrete power codes for other Onkyo receivers? Good luck.
|
LP Related Links: View my profile to access various links to key posts and downloads. |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.