|Post 1 made on Wednesday February 5, 2003 at 10:38|
I have noticed that my ts1000 was faster in sendig IR signals in macros. The TSU3000 much slower (I updated the firmware the first day I got the remote). That is why I can't use a macro in a sony plasma pfm42b2. I must navigate the menu in order to turn on the closed caption feature. No matter the ammount of delay I use the macro don't run as it was made. The commands start normal and then begin speeding... I have also try and use 2 secs delay between each IR with no luck..
|Post 2 made on Wednesday February 5, 2003 at 11:24|
There was a firmware update for slow IR on Pronto's web site a few days ago. Is this the firmware you installed.
Try using real long delays (5 to 10 sec) and see if it works. If it does, then start reducing the delay until it is unreliable again, to get the shortest working time for your macro.
Jack of all trades..
Master of None
|OP | Post 3 made on Wednesday February 5, 2003 at 12:55|
Yes I updated with that firmware and it is still slow.
I will try the long delays...
|OP | Post 4 made on Wednesday February 5, 2003 at 20:21 |
Here's something strange... I made the macro without delays, just the IRs and IT WORKED!
Isn't this weird?
Well I'll keep testing...
Please read the following:
Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace
. For information on how to advertise your service or product click here
. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.