Your Universal Remote Control Center
RemoteCentral.com
Philips Pronto NG Family Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
long press macro
This thread has 2 replies. Displaying all posts.
Post 1 made on Sunday February 19, 2006 at 05:18
Alien1213
Lurking Member
Joined:
Posts:
February 2006
3
Hi everybody,

first of all excuse me for my bad english.

secondly, how can i make a single button which can replace a long press on 1 and then a long press on 3 for example.

that's because i have a TV receiver (by phone) and when i shortly press 1 : i go to channel 1 but if i press longly on 1, i have "1_" on tv and then i press 3 : i go to channel 13.

thanx for your help.
Post 2 made on Sunday February 19, 2006 at 11:21
Lyndel McGee
RC Moderator
Joined:
Posts:
August 2001
12,992
Here's one link you should read. Found by searching for +Extend +IR +Duration

[Link: remotecentral.com]

However, if you have the latest firmware and software, you'll notice that there's a 'Duration' setting on the IR window which contains Option Buttons for 'Default' or a specified time value. What you may want to try is to create keypad buttons 0-9 and use the Default duration, then create a second set of keypad buttons to use for the 1's digit where 10's digit follows. On each of these buttons, set the Duration to something like 0.5 seconds or whatever your equipment requires to do the job.

Lyndel
Lyndel McGee
Philips Pronto Addict/Beta Tester
OP | Post 3 made on Monday February 20, 2006 at 11:17
Alien1213
Lurking Member
Joined:
Posts:
February 2006
3
Many many thanx

7000 007C 0000 0008 000C 000E 0010 0003 0003 0004 0003 001C 0004 0004 0004 0004 0004 0004 0004 0000
becomes
7000 007C 0000 0010 000C 000E 0010 0003 0003 0004 0003 001C 0004 0004 0004 0004 0004 0004 0004 0000 000C 000E 0010 0003 0003 0004 0003 001C 0004 0004 0004 0004 0004 0004 0004 0000

everything's perfect when i test it from the software but when i press ok and come back to see it,the code is again : 7000 007C 0000 0008 000C 000E 0010 0003 0003 0004 0003 001C 0004 0004 0004 0004 0004 0004 0004 0000
damn !!!

ps : i have a marantz rc5400 and Wizz.It 1.2.5

Last edited by Alien1213 on February 20, 2006 11:32.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse