| Post 1 made on Sunday February 12, 2006 at 21:44 |
BILLYBOKAY Lurking Member |
Joined:
Posts: | August 2005
5 |
|
|
No b&k brand option for preamp, so I will use learn to program the pronto . The buttons say o.k. during the learning process but none of the commands will actually work the b&k ref 31 processor. Some buttons won't learn from the dish network 921 remote but those might rf only. Also strange that there is no projector option as far as adding device. My old original pronto that was destroyed by the recliner, was able to operate my preamp and I believe had projector in the device category. Any help on these matters will be greatly appreciated.
Thank you
|
bill |
|
| Post 2 made on Sunday February 12, 2006 at 22:04 |
Peter Dewildt Loyal Member |
Joined:
Posts: | July 2001
6,307 |
|
|
You could always start by loading your old Pronto's CCF into ProntoProEditNG (File menu, Import).
|
Peter
Pronto 1000 (retired), Pronto TSU7000, RFX6000 (retired)
Pronto 2xTSU9600, RFX9400 |
|
| OP | Post 3 made on Monday February 13, 2006 at 06:56 |
BILLYBOKAY Lurking Member |
Joined:
Posts: | August 2005
5 |
|
|
My old pronto was programmed manually, without the computer, and is long dead and buried.
|
bill |
|
| Post 4 made on Monday February 13, 2006 at 11:23 |
docarter Long Time Member |
Joined:
Posts: | February 2004
10 |
|
|
Try looking in files area of this site. There are several CCFs and PCFs for the B&K Ref 30 with (presumably) working codes.
|
|
| OP | Post 5 made on Monday February 13, 2006 at 20:59 |
BILLYBOKAY Lurking Member |
Joined:
Posts: | August 2005
5 |
|
|
thank you, thank you thank you
|
bill |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
