 |
 |
|
|
Philips Pronto NG Family Forum - View Post
|
|
 |
|
|
|
 |
|
The following page was printed from RemoteCentral.com:
|
Download process has failed
| |
|
| Topic: | Download process has failed This thread has 6 replies. Displaying all posts. |
|
| Post 1 made on Thursday February 9, 2006 at 22:06 |
mike branam Lurking Member |
Joined:
Posts: | February 2006
5 |
|
|
Help, I have been building my pcf config file for many months now and just ran into this problem. I was down loading and got the Download has failed message. I have unintalled and reinstalled the program (pronto edit) with the same results after a fresh install. I can download the factory default but that is it. I have tried old pcf files from months ago and they don't work now either. I have about 58% free memory. I had downloaded about 10 times last night and then i got this message and I have not had success since. Help.
|
|
| Post 2 made on Thursday February 9, 2006 at 22:27 |
Lyndel McGee RC Moderator |
Joined:
Posts: | August 2001
12,999 |
|
|
You will first need to reboot your PC. If that does not work, search for +Possible +USB +Issues and follow the links. You may need to reinstall the driver, especially if you had the remote connected when you installed the software.
|
Lyndel McGee
Philips Pronto Addict/Beta Tester
|
|
| OP | Post 3 made on Friday February 10, 2006 at 00:00 |
mike branam Lurking Member |
Joined:
Posts: | February 2006
5 |
|
|
I downloaded the latest Pronto edit software and the latest firmware. Now when i down load it fails and i get a message on the remote that says that the cf version is not correct or the memory is currupt
|
|
| Post 4 made on Friday February 10, 2006 at 21:09 |
Lyndel McGee RC Moderator |
Joined:
Posts: | August 2001
12,999 |
|
|
What OS?
How much memory?
Are you using Virtual PC on a Mac? If so, that will never work.
|
Lyndel McGee
Philips Pronto Addict/Beta Tester
|
|
| Post 5 made on Friday February 10, 2006 at 21:59 |
Peter Dewildt Loyal Member |
Joined:
Posts: | July 2001
6,307 |
|
|
Have you updated the firmware in your Pronto?
What model Pronto do you have?
|
Peter
Pronto 1000 (retired), Pronto TSU7000, RFX6000 (retired)
Pronto 2xTSU9600, RFX9400 |
|
| Post 6 made on Saturday February 11, 2006 at 14:05 |
damon20r Lurking Member |
Joined:
Posts: | February 2006
1 |
|
|
I just got my tsu-3000 and I am having the same problem. I upgraded the firmware and it is telling me the CF version is not correct or the memory is corrupt. I'm still messing with it and going to try to redo the drivers. Hopefully that will fix it. I haven't even gotten to use it yet.
|
|
| Post 7 made on Saturday February 11, 2006 at 18:53 |
Peter Dewildt Loyal Member |
Joined:
Posts: | July 2001
6,307 |
|
|
The message usually means that the firmware in the Pronto does not match the version of ProntoEdit you are using.
|
Peter
Pronto 1000 (retired), Pronto TSU7000, RFX6000 (retired)
Pronto 2xTSU9600, RFX9400 |
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|
|
