I recently purchased a TSU 3000 and have spent the better part of the last 4 hours trying to program it. I downloaded the lastest edit software etc... and then downloaded a few files from this site (great resource by the way) but am still having issues.

I've read quite a bit here but I'm still missing something in the processes that I have been following.

I have a DTV HD10-250 TIVO recvr along with a Bose LS 2800, and Pioneer 50" plasma. The only this that works is the Pioneer. Again, I downloaded and then uploaded some configs to the unit but to no avail, I still cannot get it to work. I called Phillips and it seemed I knew more about the remote than they did. Useless! Can anyone help a newbie? I would truly appreciate it! Thank you.

I thiks that sometimes even when you download you still need to program the remote the old fashion way. One button at a time. I usually use the files here for graphics and then assign buttons by learning. I have had both the 2000 and the 3000 and like the 3000 ease of use (especially macros). Good luck you will find the people here very helpful.

bose and dtv i believe are rf controlled. you might need to do something in a menu to allow them to receive ir. owners of those brands can probably tell you exactly how...dmc

I purchased the ultimat pronto guide and read through a third of it and was able to master most of the issues I encounted when I started this project Saturday morning. Basically, it's like building a web site, fairly cut and dry. The Bose LS 2800 however, has an RF remote (Mdl RC18T1-27) I've downloaded every relative .pcf file from this site yet none work. My last obstacle is programing the RF codes for the LS2800 into the TSU3000. I keep reading but have yet to find what I'm looking for. Anyone with the codes or help for RF and the LS2800? Thanks in advance for any help.

p.s. Thanks Dan & DMC for your responses.

ganhei um tsu 3000 mas não tenho o software,alguém pode me ajudar?