 |
 |
|
|
Philips Pronto NG Family Forum - View Post
|
|
 |
|
|
|
 |
|
The following page was printed from RemoteCentral.com:
|
Details of new firmware and software...
| |
|
| Topic: | Details of new firmware and software upgrades... This thread has no replies. |
|
| Post 1 made on Friday December 2, 2005 at 07:39 |
Daniel Tonks Wrangler of Remotes |
Joined:
Posts: | October 1998
28,781 |
|
|
TSU7000, TSU7500, RU980 & RU990 firmware upgrade v3.8.14:
Solved the following problems:
- Previously, with accidental double button press, macro execution was stopped. This could result in getting stuck on a page after a jump, if this page had no navigation possibility to get out of the page. Now a double press will not have an effect on the macro execution. As a result, when started, macros cannot be interrupted anymore.
- Problem fix for the situation where sometimes an accidental double press would result in a freeze of the product. This could be demonstrated by continuously sending out IR code or a never-ending beep.
- If your text on a button is too long, the end of the text would be replaced by ‘…’. This could sometimes result in unexpected behavior. This is now fixed.
TSU3000, TSU3500, RU950 & RU960 firmware upgrade v3.9.8:
Control the screen activation yourself: Additional options are added to the settings mode to allow for configuration of screen activation rules. You can enable and disable the tilt sensor and pick from three different activation modes for the buttons below the LCD and the cursor.
New model support: Support for the new TSU3500 and RU960 Pronto touch screen remotes
Solved the following problems:
- Previously, with accidental double button press, macro execution was stopped. This could result in getting stuck on a page after a jump, if this page had no navigation possibility to get out of the page. Now a double press will not have an effect on the macro execution. As a result, when started, macros cannot be interrupted anymore.
- Problem fix for the situation where sometimes an accidental double press would result in a freeze of the product. This could be demonstrated by continuously sending out IR code or a never-ending beep.
- If your text on a button is too long, the end of the text would be replaced by ‘…’. This could sometimes result in unexpected behavior. This is now fixed.
- Problem with sending out some IR codes, example Sony DVD codes now solved. These codes were terminated too quickly when a short button press was used.
- In relation to editor, testing IR codes with set duration, will respect the duration setting. Previously, up to 150ms deviation could occur.
ProntoEdit NG v3.1.3
New model support: Support for the new TSU3500 and RU960 Pronto touch screen remotes
|
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|
|
