|
|
|
Philips Pronto NG Family Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
TSU3000 Screen Has Died :-(
| |
|
Topic: | TSU3000 Screen Has Died :-( This thread has 6 replies. Displaying all posts. |
|
Post 1 made on Tuesday April 1, 2003 at 14:26 |
tabschandler Long Time Member |
Joined: Posts: | February 2003 21 |
|
|
Just to let everyone know ...
... packed up and sent my TSU-3000 to Philips today.
Got home from work yesterday and touched the screen to ‘wake her up’ ... pressed my desired icon (a series of power on’s and a jump) ... and went to press the desired channel and there was no longer any icons on the screen. Although I could touch the screen and the remote would send the IR code ... there was no icons on the screen.
Yes, the touch screen still worked but if I didn’t know where to touch ... well, you know. Think of it as having a blindfold on and trying to use it.
Attempted the usual fixes ... replaced a fresh set of batteries, reloaded my .PCF, pushed the reset button several times, reloaded firmware 2.0.38.1 several times. Then called India. What a b!$@#.
It appears that as soon as I can provide them with a good UPS tracking number, they will get a replacement on its way back to me.
I received and have been using my 3000 since 12FEB03. Lets all hope this was the only one with this problem.
Just wanted ya’ll to know.
|
|
Post 2 made on Tuesday April 1, 2003 at 19:46 |
Not to be oversimplistic, but did you perhaps inadvertantly 'zero out' the contrast?
|
|
Post 3 made on Tuesday April 1, 2003 at 22:25 |
Daniel Tonks Wrangler of Remotes |
Joined: Posts: | October 1998 28,781 |
|
|
As far as I've seen, the contrast resets to default each time the unit reboots.
|
|
OP | Post 4 made on Wednesday April 2, 2003 at 08:58 |
tabschandler Long Time Member |
Joined: Posts: | February 2003 21 |
|
|
Schopsy,
Yup, tried that too.
|
|
Post 5 made on Wednesday April 2, 2003 at 09:43 |
Paul Cozza Long Time Member |
Joined: Posts: | December 2002 32 |
|
|
Please let us know the condition of the unit Philips sends you back. Previously, with the TSU-2000, Philips was sending out very banged up, and even defective, units as replacements. I'd like to know how they're handling the 3000.
Thanks in advance.
|
|
OP | Post 6 made on Thursday April 3, 2003 at 09:09 |
tabschandler Long Time Member |
Joined: Posts: | February 2003 21 |
|
|
|
OP | Post 7 made on Friday April 4, 2003 at 09:52 |
tabschandler Long Time Member |
Joined: Posts: | February 2003 21 |
|
|
FYI …
Received my replacement 3000 from Philips yesterday.
Sent the broken one back on 01APR, called ‘em with UPS tracking number and got replacement on 03APR … but I am only 1 state away.
The unit appears to be brand spanking new. They used the original TSU3000 box as the shipping container. No outer box, bubble wrap, peanuts, etc. And the seal (round, clear circular sticker) was loose on the box. Not broken … just loose. Not impressed.
Checked to be sure and the firmware is 2.0.38.1. Uploaded my .PCF. Noticed this 3000 appears to be more sluggish than the one I sent back. Will reload 2.0.38.1 this weekend and see if that helps.
>> Reloading 2.0.38.1 helped ... not as sluggish.
This message was edited by tabschandler on 04/07/03 09:28.
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|