|
|
|
Philips Pronto Classic Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
Topic: | Delay time in Macros This thread has 10 replies. Displaying all posts. |
|
Post 1 made on Thursday October 29, 1998 at 23:59 |
sirduke Historic Forum Post |
|
|
when setting a delay time after a certain command in a macro, does the delay setting take up 1 command in the macro or is it just in addendum to a command like on the RC2000mkII?
|
|
OP | Post 2 made on Friday October 30, 1998 at 13:21 |
Daniel Tonks Historic Forum Post |
|
|
It acts like a command. ie:
1 - VCR "Power" 2 - Delay 25ms 3 - TV "Power" 4 - TV "Video 1" 5 - Delay 100ms 6 - VCR "Play"
I doubt you're going to run out of space with up to 255 commands, though.
|
|
OP | Post 3 made on Friday October 30, 1998 at 14:17 |
sirduke Historic Forum Post |
|
|
is the delay time in milliseconds or seconds?
|
|
OP | Post 4 made on Friday October 30, 1998 at 14:33 |
Daniel Tonks Historic Forum Post |
|
|
Milliseconds. That allows for very tight timing.
|
|
OP | Post 5 made on Friday October 30, 1998 at 15:15 |
Jan van Ee Historic Forum Post |
|
|
The delay resolution is 0.1 second and delays can be set to any value from [0.1, 99.9].
|
|
OP | Post 6 made on Friday October 30, 1998 at 15:32 |
Daniel Tonks Historic Forum Post |
|
|
Hmm, my goof then - not milliseconds. That's what you get for not looking at the thing as you answer... :-)
|
|
OP | Post 7 made on Friday October 30, 1998 at 20:56 |
sirduke Historic Forum Post |
|
|
what is the default timing if you don't include a delay command after a command in a macro? hopefully it wouldn't be too fast that some gear would miss some of the commands
|
|
OP | Post 8 made on Friday October 30, 1998 at 22:53 |
Daniel Tonks Historic Forum Post |
|
|
It's pretty much instant. It just... works. It's quite nice, actually, since I can turn my whole system on in a quarter of a second! :-)
|
|
OP | Post 9 made on Saturday October 31, 1998 at 05:16 |
Timothy Morris Historic Forum Post |
|
|
I use a Hi-Fi pre-amp and a processor. I have yet to hear a Home Cinema Amp that gives me the same sound quality on CD playback. Can a Macro be set to take the volume from 0 - 50% (by telling the pronto how long the key should be held down for)?
|
|
OP | Post 10 made on Saturday October 31, 1998 at 14:10 |
Daniel Tonks Historic Forum Post |
|
|
Not currently, unless you can figure out how many times the button has to be pushed to equal 50%.
I think timed button pushes as a bad thing, however - what if you press it while you're already at 50%? Suddenly you're at 100% and you've just blown your speakers...
|
|
OP | Post 11 made on Saturday October 31, 1998 at 18:05 |
Timothy Morris Historic Forum Post |
|
|
Not when you have this quality setup:
KEF 104/2 main speakers
driven by
Audiolab 8000C pre-amp (set to 0 gain) 4x Audiolab 8000MX mono power amps (bi-amping mains)
You'd blow your ear drums before the main speakers.
My friends say I have more money than sense :)
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|