Your Universal Remote Control Center
Philips Pronto Classic Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from


Repair of Integra CHAD Model#USR-5RF
This thread has 1 response. Displaying all posts.
Post 1 made on Thursday January 25, 2018 at 13:49
Junior Member
January 2018
The touchscreen on my CHAD Intelligent Remote (Model #USR-5RF) has stopped working. It powers up but does not respond to touch commands on any button. Can it be repaired? For less than the cost of buying a replacement? Onkyo support has been no help.

Allen Miller
Post 2 made on Friday January 26, 2018 at 22:55
Lyndel McGee
RC Moderator
August 2001
Not likely that you will find a screen.

You could ebay a TSU1000/2000, Marantz RC5000/5000i and swap out the screens. Or better yet, if you can find a Marantz RC5000i, they have slightly different firmware that allows for Multiple Page Jumps inside a single Macro meaning that you can do startup animations and the like. The Chad, I think had a built in IR database but if you have learned all your codes and have not used database codes, you should be able to open your CCF and use on the Marantz.

You are in luck. there are plenty on ebay.


In fact, there is one there like new for $50USD. A screen, if available (last one I bought was over 10 years ago) would have been no less than $35.00US.
Lyndel McGee
Philips Pronto Addict/Beta Tester

Jump to

Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse