I found a mistake in Digital Projection 3GV pronto codes in [Link: remotecentral.com].
For example, Aud Mute code is as below.
0000 004A 0000 000C 0000 0031 0000 0031 0000 0031 0000 0031 0000 0031 0000 0031 0000 0032 0000 0031 0000 0062 0000 0031 0000 0031 0000 1385 0000 0031 0000 0031 0000 0031 0000 0031 0000 0031 0000 0031 0000 0032 0000 0031 0000 0061

Among it, I think "0000" is mistake. Who can correct it and post a correct one?
Many thanks.

You are correct. I don't have rights to edit the page so maybe RC Mail Daniel Tonks.

The issue is that the original code you posted declares 12 repeating pairs (000C is hex for decimal 12). If you count the 4-digit pairs after 000C, you will find that they end with the last 4 digits of 12th pair being 1385

Try this.

0000 004A 0000 000C 0000 0031 0000 0031 0000 0031 0000 0031 0000 0031 0000 0031 0000 0032 0000 0031 0000 0062 0000 0031 0000 0031 0000 1385

If this works, you can apply the same principle to the other codes that may not be working for you.

There are many similar Pronto Hex-es on this site. As we all know, they are semantically nonsensical -- "turn off (on) the light for a period of 0 microseconds, and then turn it on (off) immediately again" is simply a nonsensical instruction. So I would very much like to know how these "wacky" signals come into existence. Is it a buggy program (which one?) or what?

The ones publishing those signals should be addressed...

Barf,

Not sure how these got up there. Daniel manages that page on the site. Maybe drop him an RC Mail?

Lyndel