I contacted the manufacturer to get the IR control codes and even though I have looked into various threads in this forum I have not had any luck translating their data into usable Pronto .ccf file type hex code. Any help would be appreciated.
Audio Research sent me a pdf file with the following info:
￼￼￼Protocol: Philips RC5
System Code: Complete R5 code=1+1+T+device code+command code
Where T toggles each time a transmission starts
Device Code: 10100(b)
The remote itself has all the buttons but not standby which I need.
The info for STANDBY is as follows:
Key number : 1
Key Name : standby
Hex Code : C
Dec Code : 12
Data Code: 001100 (in the following sequence: D5 D4 D3 D2 D1 D0)
Any help would be greatly appreciated.
PS: There's a lot more on the pdf file so let me know if anything else is needed.
Last edited by joshuaad on April 30, 2015 10:17.