Your Universal Remote Control Center
RemoteCentral.com
Philips Pronto Classic Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Phillips TSU 2000 strage problem with hard-case buttons?
This thread has 5 replies. Displaying all posts.
Post 1 made on Sunday April 1, 2012 at 04:50
flagmaster1
Lurking Member
Joined:
Posts:
February 2012
9
Hi,

I have two TSU2000's and I run into an odd problem. I program my RIGHT hard button as the 30 second skip button from my Tivo. I use the LEFT one as the "replay" button, that is a 5 second rewind function.

Most of the time, this works just great, but I have noticed that if the unit goes into screen sleep mode, then both of these buttons seem to de-activate, or at least work far less reliable.

Even with the screen sleeping, I get the beep when pushing the buttons, but it dose not activate the screen, and looks as if does not even send a code out at all until I wake the screen.

I can touch the screen to wake it up, and this restores function. But I dont seem to have any issues with MUTE, or VOL--even when the screen is sleeping.

Is this a firmware fixable issue?

If not firm ware, then I guess I could just program sleep mode to be activated have a longer delay perhaps?
OP | Post 2 made on Sunday April 1, 2012 at 04:53
flagmaster1
Lurking Member
Joined:
Posts:
February 2012
9
It dose indeed still send out IR when sleeping, but I guess is that its not the correct code, because my tivo mostly wont recognize it unless the screen is awake. Very odd.
Post 3 made on Wednesday April 4, 2012 at 18:51
Daniel Tonks
Wrangler of Remotes
Joined:
Posts:
October 1998
28,600
I would try re-learning the codes. They might be on the "edge" of usability.
Post 4 made on Wednesday April 4, 2012 at 21:28
Lyndel McGee
RC Moderator
Joined:
Posts:
August 2001
12,279
also, might your battery be marginal? Have you replaced it?
Lyndel McGee
Philips Pronto Addict/Beta Tester
OP | Post 5 made on Thursday April 5, 2012 at 07:03
flagmaster1
Lurking Member
Joined:
Posts:
February 2012
9
It dose work a lot better with fresh battery. Its just odd that only the S30 hard button seems to go flaky, no other buttons at all seem to ever have a problem at all.
Post 6 made on Thursday April 5, 2012 at 18:45
Lyndel McGee
RC Moderator
Joined:
Posts:
August 2001
12,279
Maybe you should disassemble and clean components with mineral water.
Lyndel McGee
Philips Pronto Addict/Beta Tester


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse